

LPC Mangler
Opensource Xbox LPC Based Mod
- Size
- 41.3 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 85
- Pads
- 172
- Tracks, vias
- 237, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Aug 2023
- Updated
- 8 Aug 2023
Overview
LPC Mangler is an open-source printed circuit board by Team-Resurgent, from the Team-Resurgent/LPC-Mangler repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 41.3 × 49.5 mm with 13 parts on 85 nets, routed with 237 tracks and 27 vias.
Its parts include 3 capacitors, 3 resistors, 3 ICs and 3 connectors. It belongs with the FPGA and CPLD boards of this library.
README
README.mdLPC Mangler
A WIP/Concept Mod for original xbox. Designed by Members from Team Resurgent. It intercepts the LPC commands between the chipset and an LPC flash chip, rewriting the command and address bits so you can use larger, later chips that don't normally reside at the same addresses as typical LPC flash chips used in simpler mods like the Aladdin , and does so while adding as few extra clock cycles as possible to the transaction
Would love for the community to contribute & complete the design
Currently supports upto 4MB Flashes. Also has ability for serial output etc.
Requires Lframe to be implemented to work with higher rev xbox possibly.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 3 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | SST49LF160C | Package_LCC:PLCC-32_THT-Socket | U1, U2 |
| 1 | CONFIG | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | JP1 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | LPC | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J1 |
| 1 | SMBUS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | XC9572VQ64 | Package_QFP:TQFP-64_10x10mm_P0.5mm | U3 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the LPC Mangler PCB?
It measures 41.3 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LPC Mangler use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LPC Mangler KiCad files?
From the Team-Resurgent/LPC-Mangler repository on GitHub, at the commit this page was made from: the board is LPCMangler/LPCMangler.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LPC Mangler design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).