
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

A simple prototypig board for sub-board programmer extender.
Subboard programmer is an open-source printed circuit board by Tarsier-Marianz, from the Tarsier-Marianz/subboard_programmer repository on GitHub, published under the MIT licence. It is a 2-layer board of 15.2 × 99.1 mm with 6 parts on 7 nets, routed with 45 tracks and 3 vias.
Its parts include 4 connectors, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.

A simple prototyping board for sub-board programmer extender.
KiCad IDE - for letting me use a free software in designing PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_01X02 | Connectors_Samtec:SDL-102-X-XX_2x01 | P2, P3 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P1 |
| 1 | CONN_01X23 | Pin_Headers:Pin_Header_Straight_1x22_Pitch2.00mm | P4 |
| 1 | LED | LEDs:LED_D3.0mm | D1 |
| 1 | R | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 15.2 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tarsier-Marianz/subboard_programmer repository on GitHub, at the commit this page was made from: the board is subboard_programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).