

ATmega8 USB
A simple USB based prototyping board for Atmel's AVR microcontrollers (ATmega8).
- Size
- 21.7 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 15
- Pads
- 70
- Tracks, vias
- 153, 15
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Feb 2018
- Updated
- 27 Feb 2018
Overview
ATmega8 USB is an open-source printed circuit board by Tarsier-Marianz, from the Tarsier-Marianz/ATmega8_USB repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.7 × 67.3 mm with 17 parts on 15 nets, routed with 153 tracks and 15 vias.
Its parts include 6 resistors, 3 capacitors, 3 diodes, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdATmega8-USB
A simple USB based prototyping board for Atmel's AVR microcontrollers (ATmega8).

Thanks
KiCad IDE - for letting me use a free software in designing PCB
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.5K | Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R5 |
| 2 | 1N4148 | Diodes_ThroughHole:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 2 | 22pF | Capacitors_ThroughHole:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 2 | 68K | Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 10K | Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 1M | Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 4.7uF | Capacitors_ThroughHole:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | ATMEGA8-P | Housings_DIP:DIP-28_W7.62mm | IC1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P1 |
| 1 | Crystal_Small | Crystals:Resonator-2pin_w10.0mm_h5.0mm | Y1 |
| 1 | LED | LEDs:LED_D3.0mm | D3 |
| 1 | SW_PUSH | Buttons_Switches_THT:SW_PUSH_6mm_h5mm | SW1 |
| 1 | USB_A | Connect:USB_A | P2 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the ATmega8 USB PCB?
It measures 21.7 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATmega8 USB use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATmega8 USB KiCad files?
From the Tarsier-Marianz/ATmega8_USB repository on GitHub, at the commit this page was made from: the board is ATmega8_USB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATmega8 USB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).