Skip to the content
2 layers61.2 × 32.4 mmTaranium USB Hub, the printed circuit board in 3D

A USBa Hub designed by @Overlord-Runt // Taran The Idiot

Size
61.2 × 32.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
21
Pads
137
Tracks, vias
210, 7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Jul 2025
Updated
31 Jul 2025

Overview

Taranium USB Hub is an open-source printed circuit board by Taran-the-Idiot, from the Taran-the-Idiot/Taranium-USB-Hub repository on GitHub, published under the MIT licence. It is a 2-layer board of 61.2 × 32.4 mm with 17 parts on 21 nets, routed with 210 tracks and 7 vias.

Its parts include 7 capacitors, 5 connectors, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.

README

README.md

Taranium Hub

A USBa Hub designed by @Overlord-Runt // Taran The Idiot

fsds

The Taranium USB Hub

This is a 4 port usb hub with 2 USBa ports and 2 USBc ports. It has a pair of A and C on each side of the board, allowing it to be reversable.

PCB

Schematic

sdfsd

The schematic uses a custom made symbol for the ic and is wired up to normal datasheet requirements. It boasts the ability to have 2 USBa and 2 USBc ports.

PCB

dsfd

Here you can see the pcb design files for this project.

The power lines use 0.5mm traces due to the extra current.

CAD

dsfd

This is the case for the USB Hub.
It has just 2 parts and has a relatively simplistic design that still looks nice and detailed.
It only uses 2 screws because In my experince that is more than enough and it also has no space to add any more.

It is recommended to print in PETG due to the amount of heat that the hub gives off.

BOM

Parts

17
QtyValueFootprintReferences
7C_SmallCapacitor_SMD:C_0201_0603MetricC1, C2, C3, C4, C5, C6, C7
2USB_AConnector_USB:USB_A_Connfly_DS1095J2, J3
2USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ4, J5
1D_SmallDiode_SMD:D_SOD-323D1
1USB_AConnector_USB:USB_A_Molex_48037-2200_HorizontalJ1
1~Package_SO:SO-16_3.9x9.9mm_P1.27mmU1

The 14 most common of 17 parts.

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Taranium USB Hub PCB?

It measures 61.2 × 32.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Taranium USB Hub use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Taranium USB Hub KiCad files?

From the Taran-the-Idiot/Taranium-USB-Hub repository on GitHub, at the commit this page was made from: the board is PCB/Untitled.kicad_pcb and its schematic PCB/Untitled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Taranium USB Hub design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).