Skip to the content
2 layers257.2 × 76.2 mm36ribs, the printed circuit board in 3D

here you can find all files to make your own ribs

Size
257.2 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
78
Nets
68
Pads
721
Tracks, vias
645, 41
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Nov 2025
Updated
26 Jun 2026

Overview

36ribs is an open-source printed circuit board by TMRZ-1, from the TMRZ-1/36ribs repository on GitHub, published under the MIT licence. It is a 2-layer board of 257.2 × 76.2 mm with 78 parts on 68 nets, routed with 645 tracks and 41 vias.

Its parts include 37 diodes, 36 switches and 1 IC. It belongs with the RP2040 and AVR (ATmega, ATtiny) boards of this library.

README

README.md

36ribs

Here you will find everything you need to make your own 36ribs keyboard. It's my first project, so it's not too complicated.

UPDATE

Added one led under controller to light it a bit in the middle and updated vial software. Added two new cases, with magnets, normal one just without screws in case and second one with integrated plate that need only magnets. From these three my fav is one that have top mounted plate and magnets in case.

Case with screws: screenshot screenshot screenshot

Case with magnets with updated pcb: screenshot screenshot screenshot screenshot screenshot screenshot

With that layout you will need 36x keycaps(34x 1u keycaps and for spacebars 2x 1.5u keycaps) and 36x switches.

BOM for pcb

  1. 1x pro micro rp2040 controller
  2. 36x 1n4148 or 1n4148w diodes, for better looks take through hole diodes
  3. 1x B3U-1000P button for reset
  4. 1x SK6812 MINI-E RGB
  5. Optional. 36x hotswap sockets, pcb have both, solder and hotswap

BOM for acrylic cover

  1. acrylic cover, I've made 3mm for my build
  2. 8x m2 10mm standoffs
  3. 16x m2 5mm screws

BOM for v1 case with screws

  1. 16x m2 4x3.2 inserts
  2. 16x m2 5mm screws

BOM for case with magnets

  1. 8x m2 4x3.2 inserts
  2. 8x m2 5mm screws
  3. 16x 3x3 cylinder magnets (I used n42)

BOM for case with magnets and integrated plate

  1. 16x 3x3 cylinder magnets (I used n42)

Diodes should be oriented as shown below.

screenshot

The notched leg of the SK6812 MINI-E RGB LED should be in the marked location

screenshot

Inserts for v1 case with screws should be embedded in the marked places.

screenshot

Inserts for magnets case should be embedded in the marked places.

screenshot

36ribs wildlife:

screenshot screenshot

screenshot screenshot

screenshot screenshot

Parts

78
QtyValueFootprintReferences
36DiodeKEEBIO:Diode-dualD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20
36Keyswitchdaprice:Kailh_socket_MX_optionalS1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +20
3LOGOLOGOG***, G***, G***
1LED_SK6812MINIkeyboard Keebio-Parts:SK6812-MINI-ED31
1RP2040_Pro_MicroScottoMCU:RP2040_Pro_MicroU2
1SW_PushButton_Switch_SMD:SW_SPST_B3U-1000PRSW1

Similar boards

  • 2 layers57 × 75 mmTriple adapter, the printed circuit board in 3D

    Triple adapter

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    78 parts990GPL-3.0
  • 2 layers68.5 × 34.5 mmTERES PCB5-KEYBOARD Rev.A, the printed circuit board in 3D

    TERES PCB5-KEYBOARD Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    78 parts578Apache-2.0
  • 2 layers66.4 × 48.1 mmESP32, the printed circuit board in 3D

    ESP32

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    78 parts456
  • 2 layers110.5 × 111.1 mmTeensy eurorack breakout, the printed circuit board in 3D

    Teensy eurorack breakout

    newdigate/teensy-eurorack

    Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

    78 parts259MIT
  • 2 layers65 × 56 mmKeyboard whiz, the printed circuit board in 3D

    Keyboard whiz

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    78 parts253GPL-3.0
  • 2 layers43.2 × 128.3 mmXyab, the printed circuit board in 3D

    Xyab

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    78 parts227

Questions

How big is the 36ribs PCB?

It measures 257.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 36ribs use?

78 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 36ribs KiCad files?

From the TMRZ-1/36ribs repository on GitHub, at the commit this page was made from: the board is pcb/36ribs.kicad_pcb and its schematic pcb/36ribs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 36ribs design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).