Skip to the content
4 layers62 × 48.5 mmBms board, the printed circuit board in 3D
Size
62 × 48.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
202
Nets
132
Pads
591
Tracks, vias
929, 100
Pours
25
Routed
Yes
KiCad
KiCad 4
Created
10 Aug 2017
Updated
28 Oct 2018

Overview

Bms board is an open-source printed circuit board by TERA-TU-Graz, from the TERA-TU-Graz/BatteryManagement_2017 repository on GitHub. It is a 4-layer board of 62 × 48.5 mm with 202 parts on 132 nets, routed with 929 tracks and 100 vias.

It is built around the BSS205N. Its parts include 81 resistors, 54 capacitors, 36 diodes, 14 transistors and 5 connectors. It belongs with the power boards of this library.

Main components

1

README

readme.md

Battery Management System (BMS) with use of STM32 CubeMX

Parts

202
QtyValueFootprintReferences
321Ktera_rlc:R_0603inR4, R14, R15, R19, R20, R26, R27, R28, R29, R30, R31, R32, R33, R40, R41, R45 +16
245.1Vtera_diodes:SOD-323D1, D3, D10, D12, D13, D15, D16, D18, D19, D21, D22, D24, D25, D27, D28, D30 +8
18100ntera_rlc:C_0603inC3, C10, C12, C15, C20, C23, C25, C27, C29, C32, C33, C41, C43, C45, C47, C49 +2
18100n 50Vtera_rlc:C_0805inC1, C4, C13, C18, C21, C26, C30, C34, C42, C44, C46, C48, C50, C51, C52, C53 +2
162Mtera_rlc:R_0603inR3, R13, R18, R22, R23, R24, R25, R39, R44, R49, R54, R59, R64, R69, R74, R79
14BSS205Ntera_atomic_infineon:BSS205NQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14
12180Rtera_rlc:R_0805inR2, R12, R17, R38, R43, R48, R53, R58, R63, R68, R73, R78
122K2tera_rlc:R_0603inR1, R7, R16, R21, R42, R47, R52, R57, R62, R67, R72, R77
12LEDtera_diodes:LED_0805D2, D5, D8, D11, D14, D17, D20, D23, D26, D29, D32, D35
82.2utera_rlc:C_0805inC5, C7, C11, C14, C22, C24, C28, C31
633ptera_rlc:C_0603inC35, C36, C37, C38, C39, C40
21.47Ktera_rlc:R_0603inR8, R11
21.82Ktera_rlc:R_0603inR9, R10
210Ktera_rlc:R_0603inR36, R37
210utera_rlc:C_0805inC2, C19
247ntera_rlc:C_0603inC16, C17
2510Ktera_rlc:R_0603inR34, R35
2Prog_VoltageSocket_Strips:Socket_Strip_Straight_1x02X1, X2
2TI-bq76pl536tera_atomic_ic:TI_bq76PL536IC1, IC2
1100Ktera_rlc:R_0603inR5
1CONN_01X07tera_Connectors_JST:JST_EH_S07B-EH_07x2.50mm_AngledP1
1CONN_01X07tera_Connectors_JST:JST_XH_S07B-XH-A_07x2.50mm_AngledP5
1G***tera_logos:TERA_Logo_SilkS_5x12.5mmsvg2mod
1G***tera_logos:TERA_TextOnly_SilkS_2.5x9.5mmsvg2mod
1Host_Interfacetera_Connectors_Molex:Molex_PicoBlade_53398-1071_10x1.25mm_StraightP4
1JUMPER3_NOtera_general:SOLDERJUMPER_3_1mmJP1
1TS1tera_Connectors_Molex:Molex_PicoBlade_53261-0271_02x1.25mm_AngledP2
1TS2tera_Connectors_Molex:Molex_PicoBlade_53261-0271_02x1.25mm_AngledP3

The 197 most common of 202 parts.

More from TERA-TU-Graz/BatteryManagement_2017

12

Similar boards

  • 2 layers58 × 78 mmBSPD 1002, the printed circuit board in 3D

    BSPD 1002

    ManchesterStingerMotorsports/BSPD-2026

    57 parts
  • 2 layers78 × 58 mmEV Rear SDC, the printed circuit board in 3D

    EV Rear SDC

    ManchesterStingerMotorsports/EV_Rear_SDC

    Second half of Shutdown circuit logic and logging for states on the Johnson node that will sit at the back of the EV and act as a hat to the johnson node in addition to an IMU

    68 parts
  • 2 layers158 × 118 mmIMD Carrier, the printed circuit board in 3D

    IMD Carrier

    ManchesterStingerMotorsports/IMD_Carrier

    Reset board for the imd that will sit below it in the TSAC

    68 parts
  • 2 layers58 × 78 mmIC SDC Hub V2.0, the printed circuit board in 3D

    IC SDC Hub V2.0

    ManchesterStingerMotorsports/IC-SDC-Hub

    New shutdown Circuit Hub for the IC car.

    28 parts
  • 4 layersStm32h7 base, the printed circuit board in 3D

    Stm32h7 base

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    202 parts44
  • 4 layers46.1 × 45.6 mmAvionics mainboard, the printed circuit board in 3D

    Avionics mainboard

    AFS-pt/PROMETHEUS-1

    Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1

    202 parts15
  • 4 layers225.7 × 88.2 mmPipra, the printed circuit board in 3D

    Pipra

    ssbb/pipra

    30-key low profile electro-capacitive wireless split keyboard.

    202 parts10CERN-OHL-W-2.0

Questions

How big is the Bms board PCB?

It measures 62 × 48.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Bms board use?

202 parts, built around the BSS205N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bms board KiCad files?

From the TERA-TU-Graz/BatteryManagement_2017 repository on GitHub, at the commit this page was made from: the board is HW/projects/fennek_2017_18/BMS/measurement_and_balancing/bms_board_V6-1__12s_fennek2017/bms_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bms board design in my own project?

Its repository states no licence, so its author keeps all rights: ask TERA-TU-Graz before reusing the design.