Skip to the content
2 layers81.9 × 99 mmTh idp again, the printed circuit board in 3D

Th idp again

SwUniKdu/PCB
Size
81.9 × 99 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
50
Pads
101
Tracks, vias
133, 7
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jul 2026
Updated
16 Jul 2026

Overview

Th idp again is an open-source printed circuit board by SwUniKdu, from the SwUniKdu/PCB repository on GitHub. It is a 2-layer board of 81.9 × 99 mm with 21 parts on 50 nets, routed with 133 tracks and 7 vias.

Its parts include 8 ICs, 5 resistors, 3 capacitors, 1 diode and 1 transistor.

Parts

21
QtyValueFootprintReferences
12N7000_TransistorPackage_TO_SOT_THT:TO-92_InlineQ1
1Batteryidp th:multi hari_thBT1
1Buzzeridp th:buzzerBZ1
1Capacitor_0.1F_ thidp th:Capacitor_2200_16v_thC1
1Capacitor_1000_thidp th:Capacitor_2200_16v_thC5
1Capacitor_2200_16v__thidp th:Capacitor_2200_16v_thC2
1LEDLED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z4.9mmD1
1MCP6002_Op_AmpI_P_thidp th:MCP6002_OP_AMP_thU4
1MT3608_Buck_thidp th:MT3608_BUCK_thU6
1Resisitor_1000_OHM_thidp th:resistor_thR1
1Resisitor_100k_thidp th:resistor_thR3
1Resisitor_10M_ohm_thidp th:resistor_thR9
1Resisitor_1M_ohm_thidp th:resistor_thR5
1Resisitor_220_ohm_thidp th:resistor_thR4
1SIM800L_GPS_-CORE_thidp th:SIM800L_GPs_thU8
1SW_Pushidp th:multi hari_thSW1
1max30102_Heartusini_sensors:module_max30102U5
1~idp th:cjMCU333U2
1~idp th:capacitive probeU1
1~idp th:SS49e hallefect_thU9
1~idp th:ESP32_30pin_thU3

More from SwUniKdu/PCB

4

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Th idp again PCB?

It measures 81.9 × 99 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Th idp again use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Th idp again KiCad files?

From the SwUniKdu/PCB repository on GitHub, at the commit this page was made from: the board is Customer - th/th idp again.kicad_pcb and its schematic Customer - HI/him_jlc_send.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Th idp again design in my own project?

Its repository states no licence, so its author keeps all rights: ask SwUniKdu before reusing the design.