Skip to the content
2 layers57.5 × 93.2 mmWoagpad, the printed circuit board in 3D

My bad attempt at a macropad. For https://hackpad.hackclub.com/

Size
57.5 × 93.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
23
Pads
106
Tracks, vias
123, 2
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Feb 2025
Updated
19 Feb 2025

Overview

Woagpad is an open-source printed circuit board by Suya1671, from the Suya1671/woagpad repository on GitHub. It is a 2-layer board of 57.5 × 93.2 mm with 25 parts on 23 nets, routed with 123 tracks and 2 vias.

Its parts include 9 diodes, 9 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md

The Woagpad

A macropad of all time

Woagpad

The woagpad is a board I decided to create because a macropad kinda just sounds fun. I really also wanted the rotary encoders to be able to change volume and control media playback (although RMK doesn't support it yet. Eventually:tm:).

Features

  • Rust based firmware: Through the power of RMK, the firmware is written in 100% Rust. Crab gaming :crab:
  • 128x64 OLED Display: Display whatever the hell you want*
  • 2 EC11 Rotary Encoders: Control your volume or scroll through pages with these*
  • 3x3 key matrix: Keypad, macro, media controls, whatever the hell you want. You have 9 keys to mess around with (this includes the push buttons on the rotary encoders)

*The default rmk firmware does not support OLED display or rotary encoders yet. Once those are implemented, the firmware will be updated to support them. Write your own firmware to take advantage of these features!

Design

PCB

Schematic

Bog standard PCB Schematic for a macropad. This is actually my first design that uses a matrix and an OLED display so that's fun.

Also yes, 2 encoders can share a pin! Neat.

FrontBack
PCB Front DesignPCB Back Design

First PCB with actual mounting holes. although in this case, the mounting holes are used for mounting the top and bottom of the case. See the case design for more details.

Case

Case Design

Top integrated plate + frame. Bottom half with standoffs for heat inserts to screw the two halves together.

Also yes, the encoder holes are slightly larger than the encoders. I have no idea how well they'll actually fit so I decided for more tolerance than normal. It'll be fine... right?

BOM

  • 1x PCB
    • see production/gerber.zip
  • 1x Case
    • see production/Top.step
    • see production/Bottom.step
  • 7X Cherry MX Switches
  • 7X DSA Keycaps
  • 2X Rotary Encoders
  • 9X 1N4148 Diodes
  • 3X M3x5mx4mm Heatset inserts
  • 3X M3x16mm Bolts
  • 1x XIAO RP2040
  • 1x 0.91" 128x64 OLED Display

Extras

First time using RMK for firmware. It was WAY easier compared to other firmware options. Highly reccomend if you don't need additional features.

Parts

25
QtyValueFootprintReferences
9DScottoKeebs_Components:Diode_DO-35D1, D2, D3, D4, D5, D6, D7, D8, D9
7SW_PushScottoKeebs_MX:MX_PCBSW2, SW4, SW5, SW6, SW7, SW8, SW9
3, ,
2RotaryEncoder_Switch_MPScottoKeebs_Scotto:Encoder_EC11_MXSW1, SW3
1G***kibuzzard-67AA371Akibuzzard-67AA371A
1OLED_128x64Library:MODULE_DM-OLED096-636J1
1WobblQRLibrary:WobblQRQR*****
1XIAO-RP2040-DIPScottoKeebs_MCU:Seeed_XIAO_RP2040U1

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Woagpad PCB?

It measures 57.5 × 93.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Woagpad use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Woagpad KiCad files?

From the Suya1671/woagpad repository on GitHub, at the commit this page was made from: the board is PCB/woagpad.kicad_pcb and its schematic PCB/woagpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Woagpad design in my own project?

Its repository states no licence, so its author keeps all rights: ask Suya1671 before reusing the design.