
Biking leds
shelxty/biking_led
custom pcb with lights that light up with the push of a button; flex pcb that can wrap around arm to protect bikers at night

Following pcb contains a rover pcb design, its schematics, its bom(bill of materials), and the working paramters of all the components used.
Atmega328p is an open-source printed circuit board by Sujay-1010, from the Sujay-1010/Rover-PCB--KiCAD repository on GitHub. It is a 2-layer board of 42.2 × 81.9 mm with 39 parts on 68 nets, routed with 396 tracks and 53 vias.
It is built around the ATMEGA328-AU, L293D and LM2576HVS-5, with the AMS1117-3.3, MPU-6050 and TMF8820 among its other parts. Its parts include 14 resistors, 8 capacitors, 8 ICs, 2 switches and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Following pcb contains a rover pcb design, its schematics, its bom(bill of materials), and the working paramters of all the components used.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | Motor_DC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | M1, M2, M3, M4 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C4, C5, C8 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | L293D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U9 |
| 2 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW7, SW8 |
| 1 | 0.01u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 100mu | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 100u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 220u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U8 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | Servo1 |
| 1 | LM2576HVS-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U6 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U5 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | TMF8820 | Sensor_Distance:AMS_OLGA12 | U7 |
| 1 | ~ | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | U4 |

shelxty/biking_led
custom pcb with lights that light up with the push of a button; flex pcb that can wrap around arm to protect bikers at night


cukier/EspCnc
Projeto de placa em KiCad (v9) para a interface entre um modulo ESP32 e a eletronica da CNC 3035: drivers de motor de passo (ex. A4988/DRV8825/TMC2208), fins-de-curso, controle de spindle/laser e alimentacao.

MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.

KIIT-Robotic-Society/Dharma_RoboFest4.0
Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.


It measures 42.2 × 81.9 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the ATMEGA328-AU, L293D, LM2576HVS-5 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sujay-1010/Rover-PCB--KiCAD repository on GitHub, at the commit this page was made from: the board is atmega328p/atmega328p.kicad_pcb and its schematic atmega328p/atmega328p.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sujay-1010 before reusing the design.