2 layers70 × 128.5 mm
Joystick v2.0
StudioKAT/Joystick
この作品は Creative Commons 表示 - 継承 4.0 国際 (CC BY-SA 4.0) の下でライセンスされています。 This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.
103 parts9
2 layers70 × 128.5 mm
Joystick v3.0
StudioKAT/Joystick9この作品は Creative Commons 表示 - 継承 4.0 国際 (CC BY-SA 4.0) の下でライセンスされています。 This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.
- Size
- 70 × 128.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 56
- Pads
- 276
- Tracks, vias
- 559, 119
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Apr 2025
- Updated
- 2 Jul 2025
Overview
Joystick v3.0 is an open-source printed circuit board by StudioKAT, from the StudioKAT/Joystick repository on GitHub. It is a 2-layer board of 70 × 128.5 mm with 110 parts on 56 nets, routed with 559 tracks and 119 vias.
It is built around the TL072CDT, 1N5819WS and 1N4148WS, with the RKJXV122400R among its other parts. Its parts include 46 resistors, 17 capacitors, 6 ICs, 6 diodes and 6 connectors. It belongs with the keyboards and input boards of this library.
Main components
4
TL072CDT
SO-80℃~+70℃ 1.4mA 10uV/℃ 15nV/√Hz@1kHz 16V/us 2 20pA 3mV 40mA 4MHz 5pA 6V~36V 86dB Short-Circuit Protection、Built-in compensation、Latch-up suppression SO-8 FET Input Amplifiers ROHSSTMicroelectronicsFET Input Amplifiers
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
RKJXV122400R
插件10kΩ 125mW 5V ±5% 插件 Potentiometers, Variable Resistors ROHSALPSALPINEPotentiometers & Variable Resistors
README
README.mdJoystick
概要 / Overview
Joystick は、6HPサイズの片手操作に特化したマニュアルCV/Gate生成モジュールです。
XY入力端子に外部CVを接続することで、アッテネーターやインバーターとしても利用可能です。
CVレンジとオフセットはX軸・Y軸ごとに個別に調整でき、最大±10Vの範囲で任意のCVを生成できます。
スティックを押し込むと、+10VのGate信号が出力されます。
Joystick is a 6HP manual CV/Gate generator module designed for one-handed operation.
By connecting external CV signals to the X and Y inputs, it can also function as an attenuator or inverter.
Each axis (X and Y) features independent control over CV range and offset, allowing for custom voltage outputs up to ±10V.
Pressing the joystick down outputs a +10V Gate signal.
仕様 / Spec
- Format: Eurorack
- Function: Attenuator-Inverter joystick controller and Gate Generator.
- Current needs: +12V: 35mA, -12V: 35mA
- Width: 6 HP
- Depth: 25mm (including power connector)
動画 / Movie
販売 / Sales
StudioKATオフィシャルショップで販売しています。(日本国内限定)
https://www.studiokat.jp/items/106541452
ライセンス / License
この作品は Creative Commons 表示 - 継承 4.0 国際 (CC BY-SA 4.0) の下でライセンスされています。
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.
クレジット / Credits
- Designed by : StudioKAT
- Website : https://www.studiokat.jp/
- GitHub : https://github.com/StudioKAT
- X(Twitter) : https://x.com/StudioKAT_synth
- Instagram : https://www.instagram.com/studiokat_modular/
更新履歴 / Changelog
2024-09-28v1.0 Unreleased2025-04-24v2.0 Released2025-07-02v3.0 Released
Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10K | Resistor_SMD:R_0603_1608Metric | R6, R7, R9, R10, R12, R15, R20, R25, R27, R29, R30, R32, R35, R40, R45 |
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16 |
| 8 | PH_M2 | kat_eurorack:MountingHole_2.2mm_M2 | H15, H16, H17, H18, H19, H20, H21, H22 |
| 6 | 1K | Resistor_SMD:R_0603_1608Metric | R13, R23, R24, R33, R43, R44 |
| 6 | TL072CDT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5, U6 |
| 5 | 100K | Resistor_SMD:R_0603_1608Metric | R2, R11, R26, R31, R46 |
| 5 | PH_Jack | kat_eurorack:PH_AudioJack_3.5mm_Pad | H6, H7, H8, H9, H10 |
| 4 | B100K | kat_eurorack:Potentiometer_RV09 | RV2, RV3, RV5, RV6 |
| 4 | PH_Pot | kat_eurorack:PH_RV09_center | H2, H3, H4, H5 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R1, R18, R38 |
| 3 | PH_LED | kat_eurorack:PH_LED_3.0mm_Pad | H11, H12, H13 |
| 2 | 150K | Resistor_SMD:R_0603_1608Metric | R8, R28 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | 22K | Resistor_SMD:R_0603_1608Metric | R14, R34 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 2 | 3.3K | Resistor_SMD:R_0603_1608Metric | R19, R39 |
| 2 | 39K | Resistor_SMD:R_0603_1608Metric | R17, R37 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R16, R36 |
| 2 | 5kΩ 502 | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV4 |
| 2 | 8.2K | Resistor_SMD:R_0603_1608Metric | R21, R41 |
| 2 | 82K | Resistor_SMD:R_0603_1608Metric | R22, R42 |
| 2 | LED_RED_GREEN | LED_THT:LED_D3.0mm | D5, D6 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D3 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 470K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 6.8K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | GATE | kat_eurorack:AudioJack_PJ301M-12 | J2 |
| 1 | LED | LED_THT:LED_D3.0mm | D4 |
| 1 | PH_Joystick | kat_eurorack:PH_Joystick | H14 |
| 1 | POWER | kat_eurorack:BoxHeader_2x05_2.54mm_Europower | J1 |
| 1 | Panel | kat_eurorack:Panel_6HP | H1 |
| 1 | RKJXV122400R | kat_eurorack:Joystick_RKJXV122400R | JS1 |
| 1 | X_IN | kat_eurorack:AudioJack_PJ301M-12 | J4 |
| 1 | X_OUT | kat_eurorack:AudioJack_PJ301M-12 | J3 |
| 1 | Y_IN | kat_eurorack:AudioJack_PJ301M-12 | J6 |
| 1 | Y_OUT | kat_eurorack:AudioJack_PJ301M-12 | J5 |
More from StudioKAT/Joystick
1Similar boards
- 2 layers170.5 × 128.5 mm
Toolbox v2.1
StudioKAT/Toolbox
主な機能： - オーディオ/CVミキサー（加算・減算） - CVへのオフセット追加(5V/10V)・極性反転 - 1:3 バッファード・マルチプル - 2:2 ユニティミキサー - 3:1 アベレージミキサー（各チャンネルのゲイン = 1/3） - SIGNセクション：インバーター / 半波整流 / 全波整流 - LOGICセクション：アナログOR / アナログAND - S&Hセクション：サンプル＆ホールド / ホワイトノイズ出力…
340 parts15 - 4 layers60 × 102 mm
Anthracite top
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
222 parts5CERN-OHL-S-2.0 - 2 layers38.1 × 101.6 mm
Mzuelch CATs Eurosynth Slimline Clock Divider SMD Main
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
49 parts1 - 2 layers38.1 × 101.6 mm
Slimline Voltage Controlled Switch - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
63 parts166MIT - 2 layers28 × 110 mm
- 4 layers27.9 × 108 mm
- 2 layers121 × 75.5 mm
Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers38.1 × 100 mm
Questions
How big is the Joystick v3.0 PCB?
It measures 70 × 128.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Joystick v3.0 use?
110 parts, built around the TL072CDT, 1N5819WS, 1N4148WS and RKJXV122400R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Joystick v3.0 KiCad files?
From the StudioKAT/Joystick repository on GitHub, at the commit this page was made from: the board is v3.0/KiCAD/Joystick_v3.0/Joystick_v3.0.kicad_pcb and its schematic v2.0/KiCAD/Joystick_v2.0/Joystick_v2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Joystick v3.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask StudioKAT before reusing the design.