

BatteryCharger
Design files for the SOAR battery management board
- Size
- 36 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 8
- Pads
- 39
- Tracks, vias
- 37, 12
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Mar 2018
- Updated
- 17 May 2018
Overview
BatteryCharger is an open-source printed circuit board by StudentOrganisationForAerospaceResearch, from the StudentOrganisationForAerospaceResearch/BatteryBoard repository on GitHub. It is a 2-layer board of 36 × 35 mm with 14 parts on 8 nets, routed with 37 tracks and 12 vias.
It is built around the MCP73213X. Its parts include 4 connectors, 2 capacitors, 2 resistors, 1 IC and 1 diode.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3 | MK1, MK2, MK3 |
| 2 | 4.7u | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | SOAR_Kicad_Library:LOGO_SOAR | LOGO_SOAR | |
| 1 | 1K | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 3K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | Barrel_Jack | SOAR_Kicad_Library:CUI_PJ-102A_2.5mm_DC_JACK | J1 |
| 1 | Bat.Terms. | SOAR_Kicad_Library:TerminalBlock_5mm_2POS_ED2600 | J4 |
| 1 | Conn_01x04_Male | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J3 |
| 1 | Input Terms. | SOAR_Kicad_Library:TerminalBlock_5mm_2POS_ED2600 | J2 |
| 1 | LED | LEDs:LED_0805_HandSoldering | D1 |
| 1 | MCP73213 | Housings_DFN_QFN:DFN-10-1EP_3x3mm_Pitch0.5mm | U1 |
Similar boards
- 4 layers70 × 97 mm

- 2 layers58.4 × 68.6 mm

- 2 layers116.8 × 30 mm

Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm

- 2 layers34 × 45 mm

2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm

- 2 layers45.3 × 42.7 mm

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0
Questions
How big is the BatteryCharger PCB?
It measures 36 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BatteryCharger use?
14 parts, built around the MCP73213X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BatteryCharger KiCad files?
From the StudentOrganisationForAerospaceResearch/BatteryBoard repository on GitHub, at the commit this page was made from: the board is BatteryBoardV1/BatteryCharger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BatteryCharger design in my own project?
Its repository states no licence, so its author keeps all rights: ask StudentOrganisationForAerospaceResearch before reusing the design.