
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

PCB for nice!nano board and LoRa LX-LC535 radio module for mesh nets likes meshtastic and meshcore
Nice!nano pcb is an open-source printed circuit board by Straverk, from the Straverk/nice-nano-mesh repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 88 × 42.2 mm with 16 parts on 35 nets, routed with 331 tracks and 12 vias.
Its parts include 4 capacitors, 4 ICs, 3 switches and 1 connector. It belongs with the radio and wireless boards and the nRF52 and nRF5x boards of this library.
PCB for nice!nano board with microcontroller
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1, SW2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_ADC_T1 |
| 1 | 100uF | Capacitor_SMD:C_Elec_5x5.8 | C1 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_ADC_B1 |
| 1 | 220uF | Capacitor_SMD:C_Elec_6.3x7.7 | C2 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1 |
| 1 | LX-LC535 | LX-LC535:LX-LC535 | U4 |
| 1 | LoRa-E220-900M22S | LoRa_Radio:LoRa-E220-900M22S | U2 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW3 |
| 1 | TFT_320x240 | ST7789:TFT-240x320-2.4 | U3 |
| 1 | nice_nano | nice!nano:nice_nano | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 88 × 42.2 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Straverk/nice-nano-mesh repository on GitHub, at the commit this page was made from: the board is kicad-pcb/nice!nano-pcb.kicad_pcb and its schematic kicad-pcb/nice!nano-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).