
Hello.t1624-XU
FabLabReykjavik/FabAcademyArchiveOld
Archive of Fab Academy classes and examples from 2012 onward.

Simple attiny85 based lora remote (for gate and such)
Attiny1624 remote is an open-source printed circuit board by Strat00s, from the Strat00s/attiny1624_lora_remote repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 68.9 mm with 35 parts on 23 nets, routed with 196 tracks and 40 vias.
It is built around the ATTINY1624-XF, DL-LLCC68-S-433 and VG433SNX39-6W3, with the BSS138 among its other parts. Its parts include 6 capacitors, 5 resistors, 4 diodes, 3 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Simple attiny1624 based lora remote (for gate and such)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 3 | F2 | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | 1000uF | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | diode | Diode_SMD:D_SOD-323_HandSoldering | D1, D2 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 100uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 5nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | ATtiny1624-X | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Coincell_BAT_BS-7 | Custom:BAT_BS-7 | BT1 |
| 1 | DL-LLCC68-S-433 | RF_Module:Ai-Thinker-Ra-01-LoRa | U1 |
| 1 | JMP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | UART0 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | UPDI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | VG433SNX39-6W3 | Custom:ANT-TH_T14-433M | U3 |
| 1 | blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
The 27 most common of 35 parts.

FabLabReykjavik/FabAcademyArchiveOld
Archive of Fab Academy classes and examples from 2012 onward.

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
It measures 30 × 68.9 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the ATTINY1624-XF, DL-LLCC68-S-433, VG433SNX39-6W3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Strat00s/attiny1624_lora_remote repository on GitHub, at the commit this page was made from: the board is pcb/attiny1624_remote.kicad_pcb and its schematic pcb/attiny1624_remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).