4 layers66.2 × 30 mm
32 layers
LPS-1 Wiring
SteveMayze/lps-1Power Sensor 1. A remote node power sensor.
- Copper layers
- 32
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 45
- Pads
- 87
- Tracks, vias
- 251, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Jan 2024
- Updated
- 19 Jul 2026
Overview
LPS-1 Wiring is an open-source printed circuit board by SteveMayze, from the SteveMayze/lps-1 repository on GitHub, published under the Apache-2.0 licence. It is a 32-layer board with 27 parts on 45 nets, routed with 251 tracks and 0 vias.
Its parts include 17 connectors, 2 switches and 1 fuse. It belongs with the sensors and measurement boards of this library.
README
README.mdSolar Power Sensor LPS-1
A simple remote sensing node to monitor the voltage and load current for a solar/battery unit. This unit brings together the prototype projects Gateway Node, Atmega1608 Development board and Sensor node firmware (Atmega1608 and INA219) to create a unified PCB that can be deployed to the field to make a connection to the gateway project in order to transfer the sensor data to the internet.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Block_Connector_01_b | Wiring:Degson_01_PC2.5-01P-11-00AH-1_5.2 | J1, J2, J3, J4, J5, J6, J8, J9, J10, J11, J12, J13, J14, J101, J102 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | B1 |
| 1 | Chrg Fuse | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | F1 |
| 1 | Fuse Block | Wiring:FUSE_BLOCK_TRU_COMPONENTS-TC-9070396 | FB1 |
| 1 | GND Block | Wiring:Degson_04_Bridged-PC2.5-01P-11-00AH-1_5.2 | J500 |
| 1 | LPS-1 Monitoring Unit | Wiring:LPS-1_EXT_PWR | LPS1 |
| 1 | Lamp | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LA1 |
| 1 | Pwr Block | Wiring:Degson_04_Bridged-PC2.5-01P-11-00AH-1_5.2 | J7 |
| 1 | Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SK1 |
| 1 | Solar Panel | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SP1 |
| 1 | Solar charging unit | Wiring:H-TRONIC Solar-Lageregler | SC1 |
| 1 | TRU Components NO | Wiring:TruComponents_SW_LAS0_1 | SW2 |
| 1 | ~ | Wiring:TruComponents_SW_LAS0 | SW3 |
More from SteveMayze/lps-1
1Similar boards
- 32 layers121.9 × 53.3 mm
Documentary
XasWorks/Hexa-Bot
Public repository of all necessary files for the Kolleg St. Thomas Robo-Cup participating Robot.
24 parts6GPL-3.0 - 32 layers49 × 49 mm
Questions
What parts does the LPS-1 Wiring use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LPS-1 Wiring KiCad files?
From the SteveMayze/lps-1 repository on GitHub, at the commit this page was made from: the board is Wiring/LPS-1 Wiring/LPS-1 Wiring.kicad_pcb and its schematic Wiring/LPS-1 Wiring/LPS-1 Wiring.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LPS-1 Wiring design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).