
Usb button interface
SteveLRojas/usb_button_interface
Interface module that maps 6 button inputs to keyboard keys

A converter for connecting a PS/2 keyboard to a USB host
PS2 to USB Converter is an open-source printed circuit board by SteveLRojas, from the SteveLRojas/PS2_to_USB_Converter repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 49.8 × 18 mm with 29 parts on 30 nets, routed with 184 tracks and 20 vias.
It is built around the CH552G, MT9700 and MMBT3906. Its parts include 9 resistors, 5 capacitors, 4 transistors, 3 diodes and 3 connectors. It belongs with the 8051 (CH55x, STC, AT89) boards of this library.
A converter for connecting a PS/2 keyboard to a USB host.
Firmware for using a PS/2 mouse is now also available.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 5 | 2K2 | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7, R8 |
| 4 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 3 | orange | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | CH552G | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | MT9700 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Mini-DIN-6 | Signetics:Connector_Mini-DIN_Female_6Pin_2rows | J3 |
| 1 | RXD | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | TXD | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

SteveLRojas/usb_button_interface
Interface module that maps 6 button inputs to keyboard keys



zephray/NekoInk
Next gen. of NekoCal: An open-source hackable and programmable e-paper display


NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.

Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards

cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
It measures 49.8 × 18 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the CH552G, MT9700 and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SteveLRojas/PS2_to_USB_Converter repository on GitHub, at the commit this page was made from: the board is HW/PS2_to_USB_Converter/PS2_to_USB_Converter.kicad_pcb and its schematic HW/PS2_to_USB_Converter/PS2_to_USB_Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).