Skip to the content
2 layers120 × 65 mmClacky chan, the printed circuit board in 3D

A custom made pcb based split keyboard

Size
120 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
31
Pads
197
Tracks, vias
260, 35
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
8 Sep 2025
Updated
2 Oct 2025

Overview

Clacky chan is an open-source printed circuit board by StephanMoeller, from the StephanMoeller/clacky-chan repository on GitHub. It is a 2-layer board of 120 × 65 mm with 17 parts on 31 nets, routed with 260 tracks and 35 vias.

Its parts include 14 switches and 3 ICs. It belongs with the keyboards and input boards and the RP2040 and AVR (ATmega, ATtiny) boards of this library.

README

README.md

Clacky Chan

Clacky Chan is a custom made prototype split keyboard for testing out communication using trrs cables between the halves.

It consists of:

  • rp2040 pro micro
  • pcb's for each half and wire attached thumb keys as I want the thumbs to be tented just slightly on relation to the finger area.
  • No diodes. (it toke 20 mins of soldering for each side. It is not the last time I will try a diode-free design)

Its running my own firmware, zigmkay, which can be found here: https://github.com/StephanMoeller/zigmkay

Black version - Unibody case

7f63db8b-d6e0-4c39-9a91-76ac389d0bd9 2fe62f42-b4df-402e-ac64-a8a9cb1a0f7f d4c0fe6e-fffc-4eb9-a765-44190064d145 e9f355bb-30e8-4752-bb39-aa15e23ebeb3 0af01adf-e6e9-4c1b-97dd-531818d74c7d bbfe21ab-32e2-4533-92b4-2e22920a8e99 90a544af-5f98-4dbb-adc4-b786cee89c0b

Yellow version - Unibody case

0e690a9f-9a9f-48c4-8cef-8b80c9a6f156 65da4e0c-8134-4725-a974-a8907a2f9301

Yelow version - Split case

71d9d91a-8ce8-4dc4-b1a9-bd24813d666e ad2c0e29-a139-48bc-9a63-2b7b12f0825a b09ff933-2e11-4308-b0d9-10f68c65feef bc37182f-509c-406f-89c6-056639b44986 bf89299e-6e8e-4636-850b-74c77fa247b9 e1264128-50f4-48ad-9a02-e3029bf71215 ff60f66d-b6b9-4421-adec-dca49aa49fca 8c7d04c5-575d-4bbf-8a1f-15eb03bb9990 (1) dbb364ab-9d85-4f8b-a48c-94f8f26aa15f

PCB gerber files for production can be found in clackychan/production/clackychan.zig

Following picture uses wiring, eg. GPIO 6 is used as the single col and all the row pins can be determined as well. The thumb keys are wired to the GPIO 6 and then I choose GPIO 10 in the corner as the row. image

Ongoing OnShape repo with the tenting: https://cad.onshape.com/documents/76ee9714ee23fe3d9d1e73a4/w/b73638d5ae9d33482cab6d43/e/1ea8409974f0fb535c971db1

All my boards:

https://github.com/StephanMoeller/clacky-chan
https://github.com/StephanMoeller/mike-typeson
https://github.com/StephanMoeller/skinnypete32
https://github.com/StephanMoeller/wilson26

Parts

17
QtyValueFootprintReferences
14Keyswitchkeyswitches_daprice:Kailh_socket_MX_reversibleS1, S2, S3, S4, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15
2TRRSScottoKeebs_Components:TRRS_PJ-320AU2, U3
1RP2040_Pro_MicroScottoKeebs_MCU:RP2040_Pro_MicroU1

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Clacky chan PCB?

It measures 120 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Clacky chan use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Clacky chan KiCad files?

From the StephanMoeller/clacky-chan repository on GitHub, at the commit this page was made from: the board is kicad/clackychan.kicad_pcb and its schematic kicad/clackychan.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Clacky chan design in my own project?

Its repository states no licence, so its author keeps all rights: ask StephanMoeller before reusing the design.