Skip to the content
2 layers270.5 × 111 mmOutput Choc1and2, the printed circuit board in 3D

v 0.8 (future) - 1.6 mm black core pcb (pcbway), no solder mask on front, transparent solder mask on back side - New cpu introduced: Kee Boar from Adafruit - surface mounting on the backside - All routes are on the…

Size
270.5 × 111 mm
Copper layers
2
Thickness
1.6 mm
Parts
74
Nets
50
Pads
314
Tracks, vias
1,082, 42
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Apr 2026
Updated
20 Oct 2026

Overview

Output Choc1and2 is an open-source printed circuit board by StephanMoeller, from the StephanMoeller/Leonardo-KeycapRio repository on GitHub. It is a 2-layer board of 270.5 × 111 mm with 74 parts on 50 nets, routed with 1,082 tracks and 42 vias.

README

README.md

License: CC BY-NC-SA 4.0

v 0.8 (future)

  • 1.6 mm black core pcb (pcbway), no solder mask on front, transparent solder mask on back side
  • New cpu introduced: Kee Boar from Adafruit - surface mounting on the backside
  • All routes are on the backside
  • Thumb key position adjusted (no rotation angle between thumb keys)
  • Tighter switch fittings
  • Center reworked with better room for screws
  • Diode pads a little smaller

v 0.7

  • 1.6 mm black solder mask (nextpcb)
  • Only choc v1 (more snappy center hole)
  • Reworked center area and screws
  • Top plate included
  • 1.6 mm pcb (1.2 mm previously) for easier soldering as the hotswap sockets' pins were taller than 1.2 mm.
  • Ordered at nextpcb (black matte) to test out another vendors ("interpretation of") black 6O7pWZk_

v 0.6:

  • 1.2 mm black solder mask (jlcpcb)
  • Extra pinky key
  • Extra thumb key
  • Adjuated screw hole positions IMG_4265

v 0.5:

  • Choc only (v1+v2)
  • Choc spaced between rows, mx spaced between columns (except inner column that is 18mm spaced) IMG_3996

v 0.4:

  • MiniMelf diodes
  • 1mm pcb (previous was 1.6mm but the pla tenting solution started to bend)
  • 2 versions: 1 for mx, 1 for choc v1 and v2 (on the same pcb)
  • All screws are on the outside now to be able to mount/unmount without having to remove any switches image

v 0.3:

  • M3 screw holes for mounting instead of press fitting into a case
  • More tight mx footprint for better fixation of the switches image2

V 0.2:

  • Created with custom kicad generator
  • Even traces through the squiggle for a more finished look Untitleds

V 0.1:

  • Created with ergogen 1111

Parts

74
QtyValueFootprintReferences
30chocv1andv2switch, , , , , , , , , , , , , , , +14
30Diode_SMD:D_MiniMELF_Handsoldering, , , , , , , , , , , , , , , +14
13MountingHole:MountingHole_3.2mm_M3, , , , , , , , , , , ,
1promicro_from_flatfootfox

More from StephanMoeller/Leonardo-KeycapRio

4
  • 2 layers270.5 × 111 mmOutput Mx, the printed circuit board in 3D

    Output Mx

    StephanMoeller/Leonardo-KeycapRio

    v 0.8 (future) - 1.6 mm black core pcb (pcbway), no solder mask on front, transparent solder mask on back side - New cpu introduced: Kee Boar from Adafruit - surface mounting on the backside - All routes are on the…

    74 parts14
  • 2 layers268.1 × 108.4 mmLeonardo KeycapRio, the printed circuit board in 3D

    Leonardo KeycapRio

    StephanMoeller/Leonardo-KeycapRio

    v 0.8 (future) - 1.6 mm black core pcb (pcbway), no solder mask on front, transparent solder mask on back side - New cpu introduced: Kee Boar from Adafruit - surface mounting on the backside - All routes are on the…

    73 parts14
  • 2 layers263.4 × 139 mmKicad poc, the printed circuit board in 3D

    Kicad poc

    StephanMoeller/Leonardo-KeycapRio

    v 0.8 (future) - 1.6 mm black core pcb (pcbway), no solder mask on front, transparent solder mask on back side - New cpu introduced: Kee Boar from Adafruit - surface mounting on the backside - All routes are on the…

    61 parts14
  • 2 layers268.1 × 108.4 mmOutput with fillzone, the printed circuit board in 3D

    Output with fillzone

    StephanMoeller/Leonardo-KeycapRio

    v 0.8 (future) - 1.6 mm black core pcb (pcbway), no solder mask on front, transparent solder mask on back side - New cpu introduced: Kee Boar from Adafruit - surface mounting on the backside - All routes are on the…

    61 parts14

Similar boards

  • 2 layers141.1 × 126.8 mmCalculator, the printed circuit board in 3D

    Calculator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    74 parts915
  • 2 layers49 × 44 mmSimple keeb reuser, the printed circuit board in 3D

    Simple keeb reuser

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    74 parts253GPL-3.0
  • 2 layers49 × 49 mmOSBMS Balancer Rev1 sot323, the printed circuit board in 3D

    OSBMS Balancer Rev1 sot323

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    74 parts248
  • 2 layers72.4 × 72.4 mmSerialResonantFilter, the printed circuit board in 3D

    SerialResonantFilter

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    74 parts222
  • 2 layers58 × 65 mmSidechain mixer core, the printed circuit board in 3D

    Sidechain mixer core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    74 parts222
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V3

    This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

    74 parts207GPL-3.0
  • 2 layers51.5 × 89 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/feeder

    Source for LumenPnP Feeders

    74 parts202
  • 2 layers165.7 × 152.4 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    74 parts184

Questions

How big is the Output Choc1and2 PCB?

It measures 270.5 × 111 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Output Choc1and2 use?

74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Output Choc1and2 KiCad files?

From the StephanMoeller/Leonardo-KeycapRio repository on GitHub, at the commit this page was made from: the board is v0.4/pcb/output_Choc1and2.kicad_pcb and its schematic v0.1/kicad_poc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Output Choc1and2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask StephanMoeller before reusing the design.