Skip to the content
2 layers177.4 × 202.8 mmSimple sensor easyC, the printed circuit board in 3D

Hardware design, BOM, gerbers and 3D files for Simple-light-sensor-board-qwiic designed by Soldered Electronics.

Size
177.4 × 202.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
1,684
Nets
15
Pads
2,404
Tracks, vias
3,880, 920
Pours
40
Routed
Yes
KiCad
KiCad 5 (file 20210623)
Created
5 Feb 2025
Updated
28 May 2025

Overview

Simple sensor easyC is an open-source printed circuit board by SolderedElectronics, from the SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design repository on GitHub. It is a 2-layer board of 177.4 × 202.8 mm with 1,684 parts on 15 nets, routed with 3,880 tracks and 920 vias.

It is built around the DSHP03TS-S. Its parts include 240 switches, 160 resistors, 80 capacitors, 40 ICs and 40 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Simple light sensor board qwiic Hardware Design

About the Product

Light is one of the most important things in the life of most living beings. This is why it is common to work with light sensors when learning about electronics. A simple light sensor has a light dependent resistor (LDR) and sensor on a breakout board for easy wiring. The simple sensor comes with easyC connectors onboard, which enables quick and easy connection with Dasduino microcontroller boards.

As the name suggests, an LDR will change its resistance depending on the amount of light it is exposed to. The amount of light and resistance are inversely proportional. The more light it is exposed to, the less resistance it will have. So if there is more light, the board will have a resistance of several hundred Ohms. If the resistor is in the dark, it will have a resistance of several thousand Ohms.


Repository Contents

This repository contains all design files for Simple light sensor board qwiic, organized as follows:

  • CAD folder: Contains KiCAD design files, including:
    • Schematics
    • PCB layout
    • Panel PCB layout
    • Source 3D files in Fusion360, if any
    • All files are sorted by version with a detailed change log.
  • OUTPUTS folder: Includes all production-ready files, such as:
    • Bill of Materials (BOM) and interactive BOM (iBOM)
    • PDF versions of schematics
    • 3D .step file of the board
    • 3D-printable models
    • Gerber files for PCB manufacturing
    • Image of the pinout of the board
    • Product image
    • Compliance, legal and generic sales documents

Refer to the Change Log in the CAD folder for details about updates between versions.


Learn More About the Product

Beyond the repository, explore the following resources:

Soldered Verify

Soldered Verify Logo

The Soldered Verify system ensures every board you purchase from Soldered is fully functional. It also provides access to exclusive test data for your product. To get started, find the unique Soldered Verify ID on your product's packaging and enter the ID on the Soldered Verify page to access test results and additional product details.

Soldered Community

soldered-verify-logo

Soldered Community is your go-to place for technical support. Our engineers track and answer all questions posted there, and it’s a great space for the maker community. Get answers to your questions and solutions for your challenges at Soldered Community.

solde.red

solde.red is an ultimate URL shortener and information hub. Access it by typing solde.red/ followed by your product SKU, e.g., solde.red/333000, to find getting-started guides, datasheets, open-source hardware and software files, certifications, images, pinouts, and more. Read more about the shortener here.


Contributing

Contributions are welcome! Here’s how you can get involved:

  • Submit pull requests to enhance the design or fix issues.
  • Report bugs or problems by opening an issue.

We encourage community collaboration to make this product even better.


About Soldered

soldered-logo

Soldered for Makers specializes in designing and manufacturing electronic products tailored for enthusiasts, ranging from hobbyists to professionals. Our portfolio includes electronic boards, sensors, and actuators that are widely utilized in fields such as microelectronics, mechatronics, robotics, programming, and IoT. Every product we offer is designed in-house and built upon open-source hardware and software platforms. Proudly certified and manufactured within the European Union, our catalog likely includes the product you need for your project.

We complement these products with comprehensive tutorials and manuals, product descriptions, schematics, programming codes, and project examples. Our round-the-clock customer and technical support is available for all our products, irrespective of the sales channel. Soldered’s success and services reflect our maker community’s unwavering trust, for which we are deeply grateful. Join our community and create using Soldered products.


License

All Soldered open-source hardware (OSH) is under The TAPR Open Hardware License. Read more in the LICENSE file located in this repository.

Disclaimer:

No warranty - all designs in this repository are distributed in the hope that they will be useful, but without any warranty. They are provided "AS IS", therefore without warranty of any kind, either expressed or implied. The entire quality and performance of what you do with the contents of this repository are your responsibility. In no event Soldered Electronics will be liable for your damages, or losses, including any general, special, incidental, or consequential damage arising out of the use or inability to use the contents of this repository.


Have fun!

Thank you for your support from your fellow makers at Soldered Electronics.

Happy Making!

Parts

1,684
QtyValueFootprintReferences
480buzzardLabel, , , , , , , , , , , , , , , +464
160HOLE_3.2mme-radionica.com footprinti:HOLE_3.2mmH1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H1 +144
12010ke-radionica.com footprinti:0603RR1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +104
80100ne-radionica.com footprinti:0603CC1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +64
80LOGOSoldered Graphics:Logo-Front-easyC-5mmG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +64
80easyC-SMDe-radionica.com footprinti:easyC-connectorK3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3 +64
44FIDUCIALe-radionica.com footprinti:FIDUCIAL_23FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1 +28
402k2e-radionica.com footprinti:0402RR2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +24
40ATTINY404-SSNRe-radionica.com footprinti:SOIC-14U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +24
40DSHP03TS-Se-radionica.com footprinti:DSHP03TS-SK6, K6, K6, K6, K6, K6, K6, K6, K6, K6, K6, K6, K6, K6, K6, K6 +24
40HEADER-UPDIe-radionica.com footprinti:HEADER-UPDIK4, K4, K4, K4, K4, K4, K4, K4, K4, K4, K4, K4, K4, K4, K4, K4 +24
40HEADER_MALE_2X1e-radionica.com footprinti:HEADER_MALE_2X1K2, K2, K2, K2, K2, K2, K2, K2, K2, K2, K2, K2, K2, K2, K2, K2 +24
40JST-SH_2pin_1mm_C145954e-radionica.com footprinti:JST-SH_2pin_1mm_C145954K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1 +24
40LOGOSoldered Graphics:Logo-Front-SolderedFULL-10mmG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40LOGOSoldered Graphics:Symbol-Front-Water-SensoricG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40LOGOSoldered Graphics:Symbol-Front-RainingG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40LOGOSoldered Graphics:Symbol-Front-LightG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40LOGOSoldered Graphics:Logo-Back-OSH-3.5mmG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40LOGOSoldered Graphics:Symbol-Front-FlameG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40purplee-radionica.com footprinti:0402LEDD1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +24

The 1,564 most common of 1,684 parts.

More from SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design

2
  • 2 layers38 × 22 mmLM393 breakout easyC, the printed circuit board in 3D

    LM393 breakout easyC

    SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for Simple-light-sensor-board-qwiic designed by Soldered Electronics.

    43 parts
  • 2 layers22 × 38 mmSimple sensor easyC, the printed circuit board in 3D

    Simple sensor easyC

    SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for Simple-light-sensor-board-qwiic designed by Soldered Electronics.

    42 parts

Similar boards

  • 2 layers162 × 164 mmGNSS GPS L86-M33 breakout with easyC panel, the printed circuit board in 3D

    GNSS GPS L86-M33 breakout with easyC panel

    SolderedElectronics/GNSS-GPS-L86-M33-breakout-qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for GNSS-GPS-L86-M33-breakout-qwiic designed by Soldered Electronics.

    684 parts2
  • 2 layers199.6 × 174.4 mmMQ Breakout, the printed circuit board in 3D

    MQ Breakout

    SolderedElectronics/CO-sensor-MQ7-breakout-with-easyC-hardware-design

    Hardware design, BOM, gerbers and 3D files for CO-sensor-MQ7-breakout-with-easyC designed by Soldered Electronics.

    1,570 parts1
  • 2 layers100.6 × 88.6 mmHall effect sensor easyC digital, the printed circuit board in 3D

    Hall effect sensor easyC digital

    SolderedElectronics/Hall-effect-sensor-breakout-with-digital-output---qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for Hall-effect-sensor-breakout-with-digital-output-&-qwiic designed by Soldered Electronics.

    488 parts1
  • 2 layers172.2 × 211.6 mmSlider pot easyC, the printed circuit board in 3D

    Slider pot easyC

    SolderedElectronics/Slider-potentiometer-breakout-qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for Slider-potentiometer-breakout-qwiic designed by Soldered Electronics.

    526 parts1
  • 4 layers40 × 69 mmMateRix, the printed circuit board in 3D

    MateRix

    FBIopeningUPP/MateRix

    MateRix a esp32 s3 and ws2812b 2020 40x40 matrix display with joystick and imu and some buttons for fun

    145 parts
  • 4 layers50 × 32 mmUSB C PowerSupply, the printed circuit board in 3D

    USB C PowerSupply

    Kraad25/USB-C-Advanced-Power-Supply

    USB-C PD trigger board (CH224A) — KiCad schematic and PCB layout, selectable 5/9/12/20/28V output

    40 parts
  • 2 layers190.8 × 210.8 mmModul Relej 1CH easyC, the printed circuit board in 3D

    Modul Relej 1CH easyC

    SolderedElectronics/1-channel-relay-board-with-easyC-hardware-design

    Hardware design, BOM, gerbers and 3D files for 1-channel-relay-board-with-easyC designed by Soldered Electronics.

    1,252 parts
  • 2 layers210 × 164 mm2-channel relay board with easyC panel, the printed circuit board in 3D

    2-channel relay board with easyC panel

    SolderedElectronics/2-channel-relay-board-qwiic-hardware-design

    Hardware design, BOM, gerbers and 3D files for 2-channel-relay-board-qwiic designed by Soldered Electronics.

    864 parts

Questions

How big is the Simple sensor easyC PCB?

It measures 177.4 × 202.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Simple sensor easyC use?

1,684 parts, built around the DSHP03TS-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Simple sensor easyC KiCad files?

From the SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design repository on GitHub, at the commit this page was made from: the board is CAD/V1.1.2/PANEL/Simple_sensor_easyC.kicad_pcb and its schematic CAD/V1.0.0/LM393_breakout_easyC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Simple sensor easyC design in my own project?

Its repository states no licence, so its author keeps all rights: ask SolderedElectronics before reusing the design.