
DriveController
SolarEnergyRacers/solar_car_control_system_v6
solarenergyracers.ch - control system (AC, DC, MC), Documents

solarenergyracers.ch - control system (AC, DC, MC), Documents
AuxController is an open-source printed circuit board by SolarEnergyRacers, from the SolarEnergyRacers/solar_car_control_system_v6 repository on GitHub. It is a 4-layer board of 210 × 82 mm with 118 parts on 129 nets, routed with 592 tracks and 259 vias.
It is built around the CH340C, ESP32-WROOM-32 and R-78E3.3-1.0, with the SN65HVD232D, DS3231MZ/V+ and MMBT5551L among its other parts. Its parts include 42 resistors, 20 capacitors, 12 switches, 8 connectors and 6 diodes. It belongs with the ESP32 boards of this library.
solarenergyracers.ch - control system (multi controller based control system for SER v6 solar car)

.
├── AC
│ ├── CMakeLists.txt
│ ├── dependencies.lock
│ ├── lib
│ │ ├── CarControl
│ │ ├── CarState
│ │ ├── CmdHandler
│ │ ├── ConfigReader
│ │ ├── Console
│ │ ├── definitions.h
│ │ ├── Display
│ │ ├── DisplayValue
│ │ ├── DriverDisplay
│ │ ├── EngineerDisplay
│ │ ├── GPIO
│ │ ├── interfaces
│ │ ├── LocalFunctionsAndDevices.h
│ │ ├── OneWireBus
│ │ ├── placeholder.txt
│ │ ├── SDCard
│ │ └── SPIBus
│ ├── platformio.ini
│ ├── sdkconfig




| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | PCM_JLCPCB:C_0603 | C1, C2, C3, C4, C5, C6, C7, C10, C11, C14, C16, C17, C19 |
| 12 | 10kΩ | PCM_JLCPCB:R_0603 | R9, R14, R22, R23, R32, R33, R34, R35, R36, R39, R40, R41 |
| 12 | 2.2kΩ | PCM_JLCPCB:R_0603 | R2, R4, R6, R8, R11, R13, R16, R18, R24, R25, R26, R27 |
| 12 | R? | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R7, R10, R12, R15, R17, R28, R29, R30, R31 |
| 12 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12 |
| 8 | TS29-1212-1-XX-300-D | Imported_Footprints:SW_TS29-1212-1-XX-300-D_mod | S1, S2, S3, S4, S5, S6, S7, S8 |
| 7 | MountingHole | Imported_Footprints:MountingHole_3.2mm_M3_No_Copper | H1, H2, H3, H4, H5, H6, H7 |
| 4 | 1nF | PCM_JLCPCB:C_0603 | C13, C15, C18, C20 |
| 3 | R | Resistor_SMD:R_0603_1608Metric | R19, R20, R42 |
| 2 | 10uF | PCM_JLCPCB:C_0805 | C8, C9 |
| 2 | 470Ω | PCM_JLCPCB:R_0603 | R37, R38 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J8 |
| 2 | MMBT5551L | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | MountingHole | Imported_Footprints:MountingHole_6.5mm_mod | H8, H9 |
| 2 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1, SW2 |
| 1 | 120Ω | PCM_JLCPCB:R_0603 | R21 |
| 1 | 1uF | PCM_JLCPCB:C_0603 | C12 |
| 1 | 430450625 | Imported_Footprints:MOLEX_430450625 | J3 |
| 1 | BAT-HLD-012-THM | Imported_Footprints:BAT_BAT-HLD-012-THM | BT1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | ChassisBoard | Imported_Footprints:CUI_CRJ027-1-TH | J5 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J1 |
| 1 | Connector, USB-TYPE-C-16P | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J6 |
| 1 | DRIVELIGHT | LED_THT:LED_D3.0mm | D3 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | DriveController | Imported_Footprints:CUI_CRJ027-1-TH | J2 |
| 1 | EG2208 | Imported_Footprints:SW_EG2208 | S10 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | FRONTLIGHT | LED_THT:LED_D3.0mm | D4 |
| 1 | INDL | LED_THT:LED_D3.0mm | D2 |
| 1 | INDR | LED_THT:LED_D3.0mm | D5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | Imported_Footprints:SER_Logo | G1 |
| 1 | R-78E3.3-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U4 |
| 1 | Radio Enable | Imported_Footprints:SAMESKY_SJ1-2503A | J4 |
| 1 | SN65HVD232 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Tactile Button, 160gf | PCM_JLCPCB:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | S9 |
| 1 | ~ | Imported_Footprints:ILI93_Display_Adafruit | D6 |

SolarEnergyRacers/solar_car_control_system_v6
solarenergyracers.ch - control system (AC, DC, MC), Documents

SolarEnergyRacers/solar_car_control_system_v6
solarenergyracers.ch - control system (AC, DC, MC), Documents

SolarEnergyRacers/solar_car_control_system_v6
solarenergyracers.ch - control system (AC, DC, MC), Documents



Taialt97/OPENBLOCK-Keyboard-Hitbox
Open-source, modular, and easy-to-understand design for a Hit Box layout using the Raspberry Pi (RP2040) as the core.

abitwitch/whackberry
This guide assumes you have some experince with soldering. Locational references (up, down, left, right) assume the PCB is upright with the logo facing you.

coopstools/skirt-board
Design schematics for making the microcontrollers used in costume design

Zannden/numpad
This repository contains PCB and 3D model files for a wireless programmable numpad design by me.

jeffqchen/Famicom-Expansion-Port-Switcher
Enable switching role of controller connected to the Famicom expansion port

It measures 210 × 82 mm and has 4 copper layers, 1.6 mm thick.
118 parts, built around the CH340C, ESP32-WROOM-32, R-78E3.3-1.0 and SN65HVD232D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SolarEnergyRacers/solar_car_control_system_v6 repository on GitHub, at the commit this page was made from: the board is PCBs/AuxController/AuxController.kicad_pcb and its schematic PCBs/AuxController/AuxController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SolarEnergyRacers before reusing the design.