Skip to the content
2 layers19 × 22 mmTempSensorBlock, the printed circuit board in 3D

Junior Design 2 - Project Group: EJ16 Project: DC-to-DC Power Supply with GUI interface

Size
19 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
5
Pads
25
Tracks, vias
68, 7
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
8 May 2024
Updated
2 Jun 2024

Overview

TempSensorBlock is an open-source printed circuit board by SohCahNoah, from the SohCahNoah/PowerSupply_GUI repository on GitHub. It is a 2-layer board of 19 × 22 mm with 9 parts on 5 nets, routed with 68 tracks and 7 vias.

Its parts include 3 resistors, 2 connectors, 1 capacitor and 1 IC.

README

README.md

Junior Design 2 - Project Group: EJ16 Project: DC-to-DC Power Supply with GUI interface

Steps to operate:

  1. Connect the Arduino Uno to the host computer
  2. Upload the firmware to the Arduino
  3. Ensure that the correct pins are connected to the system for I2C communication (SDK, SDA, 5V VCC, GND)
  4. Close any active Serial communications with the Arduino (such as in the Arduino IDE)
  5. Run the Python Code

Parts

9
QtyValueFootprintReferences
310kResistor_SMD:R_0805_2012MetricR1, R2, R3
2MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H1
1100nFCapacitor_SMD:C_0201_0603MetricC1
1LM75BPackage_SO:VSSOP-8_3.0x3.0mm_P0.65mmU1
1Microcontroller Terminal (Screw)TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_HorizontalJ2
1Source Input (Screw)TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalJ1

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the TempSensorBlock PCB?

It measures 19 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TempSensorBlock use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TempSensorBlock KiCad files?

From the SohCahNoah/PowerSupply_GUI repository on GitHub, at the commit this page was made from: the board is SensorBlock PCB Files/TempSensorBlock.kicad_pcb and its schematic SensorBlock PCB Files/TempSensorBlock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TempSensorBlock design in my own project?

Its repository states no licence, so its author keeps all rights: ask SohCahNoah before reusing the design.