
Adafruit RGB Matrix Bonnet
SoberingRealityCheck/EDES301
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.

Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.
Window is an open-source printed circuit board by SoberingRealityCheck, from the SoberingRealityCheck/EDES301 repository on GitHub, published under the MIT licence. It is a 4-layer board of 256 × 46 mm with 27 parts on 97 nets, routed with 360 tracks and 8 vias.
Its parts include 6 ICs, 5 resistors, 4 switches, 2 connectors and 1 crystal.
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | ~ | combo_lock:FIDUCIAL_40MIL | FUD2, FUD3, FUD4, FUD5, FUD6 |
| 5 | ~ | combo_lock:R0805 | R2, R3, R4, R5, R6 |
| 4 | ~ | combo_lock:MOUNTING_HOLE | M1, M2, M3, M4 |
| 4 | ~ | combo_lock:BUTTON_12.5MM | SW1, SW2, SW3, SW4 |
| 2 | 7696 | Window:KEYSTONE_7696 | J1, J2 |
| 2 | ~ | Window:EP-TXS0-108E | U2, U3 |
| 1 | ~ | combo_lock:BUZZER_6.5MM | U4 |
| 1 | ~ | Window:MPU6050 Breakout Board | U5 |
| 1 | ~ | Window:DCJACK_2MM_PTH | U6 |
| 1 | ~ | Window:2X08_SHROUDED | X1 |
| 1 | ~ | combo_lock:POCKETBEAGLE | U1 |

SoberingRealityCheck/EDES301
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.

SoberingRealityCheck/EDES301
Repository for my Spring 2026 'EDES 301 - Introduction to Practical Electrical Engineering' classwork.

pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.


loxodes/vna
Under development open hardware microwave vector network analyzer


MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.



alexbegoon/meshimi
Meshimi unlocks powerful mesh networking for your Flipper Zero combining Meshtastic, LoRaWAN and other protocols like Matter and Thread to give you rock‑solid connectivity across miles, even off‑grid.
It measures 256 × 46 mm and has 4 copper layers, 1.6 mm thick.
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SoberingRealityCheck/EDES301 repository on GitHub, at the commit this page was made from: the board is project_02/hardware/window/window.kicad_pcb and its schematic project_02/hardware/window/combo_lock_library/combo_lock/combo_lock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).