
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

2024年高専ロボコン Aチーム
Esp32 RC is an open-source printed circuit board by SkenHub, from the SkenHub/2024_Robocon_Ateam repository on GitHub, published under the MIT licence. It is a 2-layer board of 64.1 × 61 mm with 22 parts on 48 nets, routed with 129 tracks and 3 vias.
It is built around the L7805. Its parts include 9 capacitors, 2 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the ESP32 boards of this library.
2024年高専ロボコン Aチーム
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 104 | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C6, C7, C8, C9 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | Motor_DC | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | M3, M4 |
| 2 | Motor_Servo | Connector_JST:JST_XA_S03B-XASK-1_1x03_P2.50mm_Horizontal | M1, M2 |
| 2 | ~ | BA6222:BA6222 | MD1, MD2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 330μf | Capacitor_SMD:CP_Elec_10x10 | C2 |
| 1 | 550 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ESP32-DEVKITC-32D | esp32:MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | power | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.


Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
It measures 64.1 × 61 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SkenHub/2024_Robocon_Ateam repository on GitHub, at the commit this page was made from: the board is circuit/esp32_RC/esp32_RC.kicad_pcb and its schematic circuit/esp32_RC/esp32_RC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).