4 layers68.6 × 53.3 mm
Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
218 parts357GPL-3.0
2 layers142 × 78 mm
Cyberpi Mainboard
SkaveRat/Cyberpi_Mainboard1- Size
- 142 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 153
- Pads
- 377
- Tracks, vias
- 557, 20
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Apr 2022
- Updated
- 24 Jun 2022
Overview
Cyberpi Mainboard is an open-source printed circuit board by SkaveRat, from the SkaveRat/Cyberpi_Mainboard repository on GitHub. It is a 2-layer board of 142 × 78 mm with 43 parts on 153 nets, routed with 557 tracks and 20 vias.
It is built around the TXS0108EPW. Its parts include 11 connectors, 10 capacitors, 5 resistors, 4 ICs and 1 switch. It belongs with the computers and single-board computers boards of this library.
Main components
1Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF 16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9, C10 |
| 3 | VAL** | Library:mouse-bite-3mm-slot | mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 10u 16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J5, J6 |
| 2 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3, U4 |
| 1 | 10m | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1u 16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1uH | Inductor_SMD:L_12x12mm_H4.5mm | L1 |
| 1 | 2.2u 6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 22u 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 470n 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | Battery_Cell | Connector_Molex:Molex_MicroClasp_55932-0230_1x02_P2.00mm_Vertical | BT1 |
| 1 | DM | TestPoint:TestPoint_Pad_D1.0mm | J11 |
| 1 | DP | TestPoint:TestPoint_Pad_D1.0mm | J7 |
| 1 | JMP_BAT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | JMP_USB | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Keyboard | Connector_FFC-FPC:TE_1-84953-6_1x16-1MP_P1.0mm_Horizontal | J3 |
| 1 | LCD | Connector_FFC-FPC:TE_2-84953-0_1x20-1MP_P1.0mm_Horizontal | J2 |
| 1 | MCP23017_SO | Package_SO:TSSOP-28_6.1x9.7mm_P0.65mm | U1 |
| 1 | MP2696A | Library:QFN-21 | U2 |
| 1 | Raspi Pi Zero 2W | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | SW_SPST | Library:SS312SAH4-R | SW1 |
| 1 | USB Data | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J9 |
| 1 | USB Power | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J4 |
| 1 | USBDataBoard | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J10 |
| 1 | USBDataPi | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J8 |
The 38 most common of 43 parts.
Similar boards
- 2 layers94.5 × 74.4 mm
Ax58100-stm32-ethercat
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
184 parts93 - 4 layers80 × 100 mm
Baseboard
NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.
240 parts91 - 4 layers80 × 73.8 mm
ESP32-Bit Pirate Dock
AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
49 parts85CERN-OHL-W-2.0 - 4 layers42.8 × 36.8 mm
- 2 layers81.3 × 30.9 mm
ISABlaster
scrapcomputing/ISABlaster
A software-defined ISA card powered by a Raspberry Pi Pico
24 parts53GPL-2.0 - 4 layers29 × 50.3 mm
Toshiba hvac esp32
florianbrede-ayet/esphome-toshiba-hvac-controller
ESPhome component & hardware to control Toshiba & Carrier HVAC units with WIFI interface
7 parts38MIT - 4 layers65 × 100 mm
Questions
How big is the Cyberpi Mainboard PCB?
It measures 142 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cyberpi Mainboard use?
43 parts, built around the TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cyberpi Mainboard KiCad files?
From the SkaveRat/Cyberpi_Mainboard repository on GitHub, at the commit this page was made from: the board is mainboard.kicad_pcb and its schematic charge_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cyberpi Mainboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask SkaveRat before reusing the design.