

Main Board C
Code for the Original Midi-Sentinel
- Size
- 57.2 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 52
- Pads
- 110
- Tracks, vias
- 202, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Mar 2024
- Updated
- 6 Apr 2024
Overview
Main Board C is an open-source printed circuit board by Sinedrone-Sentinel, from the Sinedrone-Sentinel/MIDI-Sentinel repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 57.2 × 98 mm with 12 parts on 52 nets, routed with 202 tracks and 1 via.
Its parts include 5 connectors and 1 IC. It belongs with the audio and music boards of this library.
README
README.mdThis is the Midi-Sentinel Project
A midi controller with BOTH a joystick AND a thumbstick. However, you are not limited to JUST these 2 XY controls. You can have 2 Joysticks, or 2 thumbsticks or any combination that you wish. You only need to modify the project to your needs.
BEFORE YOU START BUYING PARTS The LCD screen and the Mainboard ARE DIFFERENT SIZES on prototype B than they are on prototype A. Make sure that the filename prefixes MATCH in your LOCAL folder copy before you start spending money!
In the DIY section, you will find "How-To" guides to build the Midi Sentinel, step-by-step for each version of the Midi-Sentinel. Along with separate parts lists for each version that includes the original purchase source. (No guarantee that any particular part will still be in stock on sites listed.)
In the Images section, you will find pictures of the different versions so you know what you are looking for in the other sections.
In the CAD section, you will find the files for the early prototype and the final Kickstarter version. The early kickstarter version will be cheaper to make considering that the enclosure used was NOT a custom designed enclosure, but an off the shelf enclosure that you can buy online for around $20. Also, worth noting. If you buy the "Off-the-shelf" enclosure, there is NO usb mounting "hole" on the back. You will either need to cut that out yourself or the website where it is sold has a fairly cheap machining option where they will modify it for you before shipping.
In the EDA section, you will find the mainboard circuit board design file and the knob controller circuit board file. These can be uploaded as they are to sites like PCBWay.com to be manufactured for about $5 per board. (Be aware though, PCBWay has a 5 board minimum per schematic.)
If you are here, it is because you are interested in either building your own (DIY kit or self sourcing parts) or you want to modify the one you have. Either way here is a short list of basic tools and items that you should have before you start.
Soldering Iron, Solder, Flux pen or paste, spare wire, multimeter, philips head screw driver, wire cutters, wire brush (for cleaning soldering iron)
Other tools may be required depending on what you are attempting.
Software needed, Arduino IDE.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 16_Pin_IDC_2x08_Power | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | IDC1 |
| 1 | Arduino_Micro | Arduino:Arduino_Micro | U1 |
| 1 | Buttons | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | Joystick | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J11 |
| 1 | LCD | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9 |
| 1 | Multiplexer | CD74CH4067:BOB-09056 | BOB-1 |
| 1 | Rotary | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | Thumb | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J10 |
The 8 most common of 12 parts.
More from Sinedrone-Sentinel/MIDI-Sentinel
2- 2 layers57.2 × 98 mm

- 2 layers184 × 42 mm

Similar boards
- 2 layers

Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm

- 2 layers40 × 15 mm

Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm

- 2 layers26 × 16.9 mm

- 2 layers49 × 25 mm

5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm

Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the Main Board C PCB?
It measures 57.2 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main Board C use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main Board C KiCad files?
From the Sinedrone-Sentinel/MIDI-Sentinel repository on GitHub, at the commit this page was made from: the board is EDA Files/Main-Board_C/Main-Board_C.kicad_pcb and its schematic EDA Files/Knob-Mount/Knob-Mount.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main Board C design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).