

Reflow Plate
- Size
- 88 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 17
- Pads
- 48
- Tracks, vias
- 32, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Mar 2024
- Updated
- 4 Mar 2024
Overview
Reflow Plate is an open-source printed circuit board by Siddharth2308, from the Siddharth2308/Solder-Reflow-Plate repository on GitHub. It is a 2-layer board of 88 × 53 mm with 13 parts on 17 nets, routed with 32 tracks and 0 vias.
It is built around the AMS1117-3.3 and DC-005-5A-2.0. Its parts include 7 capacitors, 2 ICs, 2 connectors, 1 resistor and 1 transistor. It belongs with the ESP32 boards of this library.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDC-005-5A-2.0
插件-20℃~+70℃ 24V 2mm 5A 6.2mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSXKB ConnectionDC Power Connectors
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C4, C6 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C3, C5 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_4x4.5 | C2 |
| 1 | 1nF | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | DC-005-5A-2.0 | DC-Jack-5A:XKB_DC-005-5A-2.0 | J1 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32S3 | Xiao-ESP32S3:MOUDLE14P-SMD-2.54-21X17.8MM | U1 |
| 1 | NMOS | Package_TO_SOT_SMD:ATPAK-2 | Q1 |
| 1 | R | Resistor_SMD:R_1206_3216Metric | R3 |
Similar boards
- 2 layers73.5 × 92.8 mm

- 4 layers78 × 86 mm

SJ-201-R10
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
185 parts113 - 4 layers100 × 80 mm

Lamp rev a
laminarforge/laminarforge-cad
Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device
107 parts - 2 layers149.9 × 99.5 mm

- 2 layers65 × 70 mm

Openradfan
andrekuehne/openradfan
An ESPHome-driven controller for radiator fans to improve heat output
49 parts29MIT - 4 layers100 × 100 mm

DrivetrainDrillMotorControllerPCB
rice-robotics-club/Rover-ELEC
Repo for all you rover elec fiends
30 parts5GPL-3.0 - 4 layers100 × 50 mm

Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers240 × 47 mm

Questions
How big is the Reflow Plate PCB?
It measures 88 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Reflow Plate use?
13 parts, built around the AMS1117-3.3 and DC-005-5A-2.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Reflow Plate KiCad files?
From the Siddharth2308/Solder-Reflow-Plate repository on GitHub, at the commit this page was made from: the board is Reflow-Plate.kicad_pcb and its schematic Reflow-Plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Reflow Plate design in my own project?
Its repository states no licence, so its author keeps all rights: ask Siddharth2308 before reusing the design.