4 layers36 × 50.2 mm
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0
2 layers167 × 78.3 mm
OVP breakout
SiLab-Bonn/PXD-OVP1Overvoltage Protection (OVP) for the LMU-PS
- Size
- 167 × 78.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 135
- Pads
- 340
- Tracks, vias
- 623, 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Jan 2023
- Updated
- 31 Jul 2023
Overview
OVP breakout is an open-source printed circuit board by SiLab-Bonn, from the SiLab-Bonn/PXD-OVP repository on GitHub. It is a 2-layer board of 167 × 78.3 mm with 23 parts on 135 nets, routed with 623 tracks and 3 vias.
It is built around the BSS138. Its parts include 9 connectors, 5 resistors, 2 transistors and 1 capacitor. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
OVP_breakout/README.mdOVP-Test-Board v1.0
PCB design of the Arduino Nano-based OVP-Test-Board.
This folder contains the .kicad_*** files to edit the PCB and the schematic in Kicad.
The gerber files are included in fabrication.zip.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5 |
| 3 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J5, J6, J7 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_02x30_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x30_P2.54mm_Vertical | J1, J2 |
| 2 | LOGO | silab:SiLab Logo | G***, G*** |
| 2 | LOGO | silab:UBonn Logo | G***, G*** |
| 2 | SAMTEC-MMS-130-01-X-DV | mms_connector:SAMTEC-MMS-130-01-X-DV | Con1, Con2 |
| 1 | 100n | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano_WithMountingHoles | Arduino1 |
| 1 | RJ45_RJHSE-5380 | silab:RJ45_Amphenol_RJHSE5380 | RJ45 |
Similar boards
- 4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers44.2 × 29.3 mm
- 4 layers142.2 × 82.6 mm
A10-A20-OLINUXINO MICRO-4GB Rev D
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
558 parts429GPL-2.0 - 2 layers21.6 × 52.3 mm
Ps2 pico hat
No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico
17 parts399MIT - 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
61 parts379Apache-2.0 - 4 layers74 × 104 mm
Questions
How big is the OVP breakout PCB?
It measures 167 × 78.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OVP breakout use?
23 parts, built around the BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OVP breakout KiCad files?
From the SiLab-Bonn/PXD-OVP repository on GitHub, at the commit this page was made from: the board is OVP_breakout/OVP_breakout.kicad_pcb and its schematic OVP_breakout/OVP_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OVP breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask SiLab-Bonn before reusing the design.