2 layers88.3 × 105 mm
DMX ESP Stepper controller
electron-rare/DMX_ESP_Stepper-controller
contrôle de moteur pas à pas selon commande DMX, pour l'opéra de Montpellier
47 parts3GPL-3.0
2 layers52.5 × 88.5 mm
ESP32-2-Relay
Shuzukochan/ESP32-2-Relay- Size
- 52.5 × 88.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 84
- Pads
- 246
- Tracks, vias
- 407, 219
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Nov 2024
- Updated
- 23 Nov 2024
Overview
ESP32-2-Relay is an open-source printed circuit board by Shuzukochan, from the Shuzukochan/ESP32-2-Relay repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 52.5 × 88.5 mm with 45 parts on 84 nets, routed with 407 tracks and 219 vias.
It is built around the ESP32-WROOM-32, AMS1117-3.3 and USBLC6-2SC6, with the BC847W, BC857 and SRD-05VDC-SL-C among its other parts. Its parts include 14 resistors, 7 capacitors, 6 ICs, 6 diodes and 4 transistors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
6
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
BC847W
SOT-323-3-65℃~+150℃ 1 NPN 100MHz 100mA 110 200mV 200mW 45V 5uA 6V NPN SOT-323 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
BC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
SRD-05VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 15A 250V@AC 360mW 5 5V 70Ω Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power Relays
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R13, R20, R21 |
| 3 | 100nF | Capacitor_SMD:C_0201_0603Metric | C4, C10, C13 |
| 2 | 10uF | Capacitor_SMD:C_0201_0603Metric | C3, C14 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R9, R11 |
| 2 | 1N4007 | Diode_SMD:D_SMA | D3, D5 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric | R8, R10 |
| 2 | 22uF | Capacitor_SMD:C_0201_0603Metric | C1, C2 |
| 2 | 5k6 | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | BC847W | Package_TO_SOT_SMD:SOT-323_SC-70 | Q3, Q4 |
| 2 | BC857 | Package_TO_SOT_SMD:TSOT-23 | Q1, Q2 |
| 2 | PC817 | Shuzuko_footprint:SMDIP-4_W7.62mm | U5, U6 |
| 2 | RED_LED | LED_SMD:LED_0201_0603Metric | D2, D4 |
| 2 | SRD-05VDC-SL-C | Shuzuko_footprint:RELAY_SRD-05VDC-SL-C | K1, K2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3, SW4 |
| 1 | 1n4148 | Diode_SMD:D_SOD-123 | D8 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AMS1117-3.3 | Shuzuko_footprint:SOT-223-3_TabPin2 | U1 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U8 |
| 1 | Conn_01x02 | TRUNGTHAO:Conn_XH-P2.54mm-2P | J4 |
| 1 | ESP32-WROOM-32 | Shuzuko_footprint:ESP32-WROOM-32 | U4 |
| 1 | Relay-1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | Relay-2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | YELLOW_LED | LED_SMD:LED_0201_0603Metric | D1 |
Similar boards
- 2 layers55.6 × 57.2 mm
- 2 layers83.5 × 83.7 mm
Leomanangka esp32-4-channel relays esp32-4-channel relays
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
63 parts1 - 2 layers
- 2 layers159 × 140.1 mm
Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers87.7 × 49.2 mm
Oledsndio
mekatronik-achmadi/example_collection
Store My Personal Examples on Development Topics
37 parts2 - 4 layers240 × 70 mm
- 2 layers
Questions
How big is the ESP32-2-Relay PCB?
It measures 52.5 × 88.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-2-Relay use?
45 parts, built around the ESP32-WROOM-32, AMS1117-3.3, USBLC6-2SC6 and BC847W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-2-Relay KiCad files?
From the Shuzukochan/ESP32-2-Relay repository on GitHub, at the commit this page was made from: the board is ESP32-2-Relay.kicad_pcb and its schematic ESP32-2-Relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-2-Relay design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).