
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

(Click here for the English version of the document.)
Shiro is an open-source printed circuit board by ShinoharaTa, from the ShinoharaTa/keyboards repository on GitHub. It is a 2-layer board of 54.9 × 90.9 mm with 32 parts on 25 nets, routed with 206 tracks and 7 vias.
Its parts include 15 diodes, 15 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
(Click here for the English version of the document.)
ここには私、Shinoharaの作成したキーボードの情報を記載します。
以下、必要なドキュメント
初設計の左右分割 Column Staggardキーボード
部品点数を削減してシンプルにしつつ耐久性やスイッチ交換可能などのメンテナンス性を確保
販売はありません。
→後継製品:RURA66
2019年の販売開始から2022年まで継続したロングセラー商品 以下でお取り扱いがありました。

※現在は終売しました。
基板のみ販売を継続しています。
キーボードの設計データを公開しました。
設計データの利用にあたっては、かならず利用規約を読み、同意の上での活用をお願いします。
名刺サイズをベースに拡張したキーボード
BlackMask60ベースに再設計したキーボード

| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | D | kbd:D3_SMD_1side | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 15 | SW_PUSH | SMKJP:SW_kailh_pg1350_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 1 | ProMicro | kbd:ProMicro_v2_1side_Rev | U1 |
| 1 | SW_PUSH | kbd:ResetSW | SW_RST1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 54.9 × 90.9 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShinoharaTa/keyboards repository on GitHub, at the commit this page was made from: the board is Shiro/pcb/Shiro/shiro.kicad_pcb and its schematic Shiro/pcb/Shiro/shiro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ShinoharaTa before reusing the design.