Skip to the content
2 layers45 × 9 mmAccelerometer, the printed circuit board in 3D

Repo to develop LIS2DU12 communications with DA14531 BLE enabled microcontroller.

Size
45 × 9 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
12
Pads
64
Tracks, vias
181, 11
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Oct 2025
Updated
28 Oct 2026

Overview

Accelerometer is an open-source printed circuit board by SheffieldMLtracking, from the SheffieldMLtracking/LIS2DU12-DA14531-SerialComms repository on GitHub. It is a 2-layer board of 45 × 9 mm with 13 parts on 12 nets, routed with 181 tracks and 11 vias.

Its parts include 2 capacitors, 1 IC, 1 diode, 1 connector and 1 crystal. It belongs with the sensors and measurement boards of this library.

README

README.md

LIS2DU12-DA14531-SerialComms

Repo to develop LIS2DU12 communications with DA14531 BLE enabled microcontroller.

I've used the blinky example here to build the i2c stuff!

Parts

13
QtyValueFootprintReferences
3, ,
2CCapacitor_SMD:C_0402_1005MetricC1, C1
1Conn_01x08_PinLibrary:FPC_1x08_P1.00mm_plug_3mmJ1
1Crystal_GND24Library:Crystal_SMD_Abracon_ABM13W-4Pin_1.2x1.0mmY1
1DA14531_17-ball_WLCSPLibrary:DA14531_17-ball_WLCSPU1
1LED1KPG-0402SURKKC:KPG-0402SURKKC-TTLED1

The 9 most common of 13 parts.

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Accelerometer PCB?

It measures 45 × 9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Accelerometer use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Accelerometer KiCad files?

From the SheffieldMLtracking/LIS2DU12-DA14531-SerialComms repository on GitHub, at the commit this page was made from: the board is Accelerometer/Accelerometer.kicad_pcb and its schematic Accelerometer/Accelerometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Accelerometer design in my own project?

Its repository states no licence, so its author keeps all rights: ask SheffieldMLtracking before reusing the design.