2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0
2 layers42 × 61.5 mm
Battlebot motherboard
Sheepy3/MC-Robotics-Battlebot3repository for the ECAD, CAD, and firmware of R4PT0R
- Size
- 42 × 61.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 33
- Pads
- 106
- Tracks, vias
- 6,237, 137
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2024
- Updated
- 3 Jun 2025
Overview
Battlebot motherboard is an open-source printed circuit board by Sheepy3, from the Sheepy3/MC-Robotics-Battlebot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 42 × 61.5 mm with 29 parts on 33 nets, routed with 6,237 tracks and 137 vias.
Its parts include 12 capacitors, 6 resistors and 3 ICs. It belongs with the computers and single-board computers boards and the RP2040 boards of this library.
README
README.md[to-do]
stole borrowed STEP for XIAO RP2040 from https://grabcad.com/library/seeed-studio-xiao-rp2040-1
PCB
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C7, C8 |
| 4 | 10kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R6 |
| 4 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6 |
| 2 | 100uF | footprints:CAP_UCD_4X5P8_NCH | C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 22kohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | Conn_01x02_Socket | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | WHEEL, WHEEL |
| 2 | L9958SBTR | footprints:POWERSO16_STM | U2, U3 |
| 1 | 12Vin | library:2_Wire | BATT |
| 1 | BEC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | TO ESC |
| 1 | Fan connector | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | FAN |
| 1 | LOGO | LOGO | G*** |
| 1 | Reciever | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RX |
| 1 | XIAO-RP2040-SMD | footprints:XIAO-RP2040-SMD | U1 |
The 28 most common of 29 parts.
Similar boards
- 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
Questions
How big is the Battlebot motherboard PCB?
It measures 42 × 61.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Battlebot motherboard use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Battlebot motherboard KiCad files?
From the Sheepy3/MC-Robotics-Battlebot repository on GitHub, at the commit this page was made from: the board is Motherboard/Battlebot_motherboard.kicad_pcb and its schematic Motherboard/Battlebot_motherboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Battlebot motherboard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).