

DC Divider ATX Unit
A DC power breakout board for ATX power supply units to provide multiple voltages to devices.
- Size
- 53 × 79.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 12
- Pads
- 48
- Tracks, vias
- 33, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Jun 2023
- Updated
- 4 Jul 2023
Overview
DC Divider ATX Unit is an open-source printed circuit board by Sharkeology, from the Sharkeology/DC_Divider_ATX_Unit repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 53 × 79.1 mm with 8 parts on 12 nets, routed with 33 tracks and 0 vias.
Its parts include 4 connectors, 3 fuses and 1 IC. It belongs with the power boards of this library.
README
README.mdDC Divider Project - ATX Base Unit
The ATX Base Unit is part of the larger DC Divider project meant for powering various 12, 9 and 5 volt powered devices (namely games consoles and A/V equipment) from a single ATX power supply unit. The Base Unit was made with the intention of being simple to assemble by beginners and uses off-the-shelf parts and modules.
Bill of Materials
- 1 x ATX Base Unit PCB
- 1 x Right Angle ATX connector (Molex MiniFit Jr) - PRT-09498
- 3 x MINIVAL-style fuse holders (KEYS3568)
- 1 x LM2596 Adjustable Buck Converter Module
- 3 x Phoenix MSTB-style 2-pin connectors (5.08mm pin spacing)
Once assembled and connected to an ATX supply, the LM2596 module's output voltage can be adjusted to the users needs (although the project was made with 9 volts in mind).
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J2, J3, J4 |
| 3 | Fuse | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1, F2, F3 |
| 1 | ATX-24 | Connector_Molex:Molex_Mini-Fit_Jr_5569-24A2_2x12_P4.20mm_Horizontal | J1 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | LM2596 module:YAAJ_DCDC_StepDown_LM2596 | U1 |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the DC Divider ATX Unit PCB?
It measures 53 × 79.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DC Divider ATX Unit use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DC Divider ATX Unit KiCad files?
From the Sharkeology/DC_Divider_ATX_Unit repository on GitHub, at the commit this page was made from: the board is DC_Divider_ATX_Unit.kicad_pcb and its schematic DC_Divider_ATX_Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DC Divider ATX Unit design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).