
ShiroFPV Flight Controller
ShiroFPV/ShiroFPV_Flight_Controller_Collection
Official repository for public ShiroFPV flight controller designs, encompassing fully verified productions as well as ongoing, untested hardware revisions.

[Satellite] Satellite subsystem development.
Satellite is an open-source printed circuit board by Serra-Rocketry, from the Serra-Rocketry/satellite repository on GitHub. It is a 2-layer board of 47.5 × 40 mm with 4 parts on 22 nets, routed with 40 tracks and 0 vias.
It is built around the BME280 and ICM-20602. It belongs with the ESP32 and RISC-V boards of this library.
PocketQube satellite project by Serra Rocketry Team for the Latin American Space Challenge (LASC) 2026. Focus on bioinspired autorotating recovery system (SRAB) and LoRa-based telemetry triangulation.
The Helike satellite collects flight telemetry (IMU, barometric data, GPS) and transmits it via LoRa radio at 915 MHz to a ground station. The payload is a passive autorotating recovery system inspired by maple seed aerodynamics.
| Component | Model | Interface |
|---|---|---|
| MCU | ESP32-C3 Super Mini | - |
| Barometric | BME280 (or BMP280) | I2C (0x76) |
| IMU | ICM-20602 | I2C (0x69) |
| GPS | NEO-8M | UART (9600 baud) |
| Radio | RFM95W | SPI (915 MHz) |
| Storage | microSD card + LittleFS | SPI / flash |
extras/)Dependencies managed automatically by PlatformIO:
| Library | Version |
|---|---|
| sandeepmistry/LoRa | ^0.8.0 |
| Adafruit BME280 Library | ^2.2.4 |
| Adafruit BMP280 Library | ^2.6.8 |
| TinyGPSPlus | ^1.0.3 |
pio run -e helike_esp32c3pio run -e helike_esp32c3 -t upload --upload-port /dev/ttyACM0pio device monitor -b 115200pio test -e nativesatellite/
├── src/ # Main firmware source
│ ├── main.cpp # Entry point (setup + loop)
│ ├── config.h # Global configuration
│ ├── sensors/ # Sensor drivers (ISensor interface)
│ │ ├── BME280Sensor.h/.cpp
│ │ ├── ICM20602Sensor.h/.cpp
│ │ └── GPSSensor.h/.cpp
│ └── modules/ # System modules
│ ├── LoRaModule.h/.cpp
│ ├── TelemetryModule.h/.cpp
│ ├── FilesystemModule.h/.cpp
│ ├── LEDModule.h/.cpp
│ └── BuzzerModule.h/.cpp
├── lib/calc/ # Header-only calculation library
│ ├── SensorData.h
│ ├── VerticalVelocity.h
│ ├── ApogeeDetection.h
│ └── DataValidation.h
├── test/ # Native unit tests (Unity)
│ ├── test_vz/
│ ├── test_apogee/
│ └── test_validation/
├── test_hardware/ # Hardware validation sketches| Document | Description |
|---|---|
| Software Architecture | Module structure, data flow, validation |
| Hardware Specs | Pinout, sensors, LoRa configuration |
| Firmware Guide | Build, upload, testing, debug |
| Flowcharts | System diagrams (Mermaid) |
| ADRs | Architecture Decision Records |
| Hardware Tests | Bench guides and checklists |
| Wing Analysis | SRAB aerodynamics |
test_hardware/sensor/test_hardware/integration/pio test -e nativeextras/wing-analysis/# Markdown linting
npx -y markdownlint-cli "README.md" "docs/**/*.md" "test_hardware/docs/**/*.md" "extras/**/*.md" "hardware/**/*.md"
# Native unit tests
pio test -e nativeMIT License — see LICENSE file for details.
Serra Rocketry Team — Missão Helike (#213 - LASC 2026)

ShiroFPV/ShiroFPV_Flight_Controller_Collection
Official repository for public ShiroFPV flight controller designs, encompassing fully verified productions as well as ongoing, untested hardware revisions.







crteensy/yolo-fc_1-3S
1-3S capable variant of the Yolo flight controller
It measures 47.5 × 40 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the BME280 and ICM-20602. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Serra-Rocketry/satellite repository on GitHub, at the commit this page was made from: the board is hardware/electronics/electronics/electronics.kicad_pcb and its schematic hardware/electronics/electronics/electronics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Serra-Rocketry before reusing the design.