
Game
Anycircle11139s/Game-controller-thing
So I just spent a really, really long time buiding a handheld game because my friend said hed let me have some golen gaytime if I designed and built a game :D

8-key with oled/slide pot -> no matrix
Macropad V3 is an open-source printed circuit board by SebastianMn4345, from the SebastianMn4345/macropad-V3 repository on GitHub, published under the MIT licence. It is a 2-layer board of 136.5 × 56.4 mm with 14 parts on 22 nets, routed with 85 tracks and 2 vias.
It is built around the PTA2043-2010CIB103. Its parts include 3 resistors, 1 IC and 1 switch. It belongs with the keyboards and input and lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
8-key with oled/slide pot -> no matrix
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MX_SW_solder | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3 |
| 1 | ARDUINO_PRO_MICRO | footprints:ARDUINO_PRO_MICRO | U1 |
| 1 | Conn_01x04_Socket | KiCad-SSD1306-0.91-OLED-4pin-128x32:SSD1306-0.91-OLED-4pin-128x32 | 128x32oLed1 |
| 1 | PTA2043-2010CIB103 | Slide-potentiometer:TRIM_PTA2043-2010CIB103 | R1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |

Anycircle11139s/Game-controller-thing
So I just spent a really, really long time buiding a handheld game because my friend said hed let me have some golen gaytime if I designed and built a game :D

Anycircle11139s/Macropad-v2
I wanted to make a second version of my macropad because I was confident, that with my improved skills, I could cook up something better. I spent a long time creating this, and I'm really proud of what I made.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 136.5 × 56.4 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the PTA2043-2010CIB103. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SebastianMn4345/macropad-V3 repository on GitHub, at the commit this page was made from: the board is macropad-V3/macropad-V3.kicad_pcb and its schematic macropad-V3/macropad-V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).