Skip to the content
2 layers63 × 53.5 mmFriendshipBracelet, the printed circuit board in 3D

Friendship Signal Bracelets, which as the name suggests, light up when a bestie is nearby :)

Size
63 × 53.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
38
Pads
139
Tracks, vias
330, 60
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Jun 2026
Updated
14 Aug 2026

Overview

FriendshipBracelet is an open-source printed circuit board by Sealflux, from the Sealflux/Friendship-Signal-Bracelets repository on GitHub, published under the MIT licence. It is a 2-layer board of 63 × 53.5 mm with 25 parts on 38 nets, routed with 330 tracks and 60 vias.

It is built around the HS96L03W2C03, SPX3819M5-L-1-8 and WS2812B-V6, with the 1207-P6.5MM among its other parts. Its parts include 6 capacitors, 6 ICs, 6 diodes, 1 resistor and 1 switch. It belongs with the ESP32 and RISC-V boards of this library.

Main components

4

README

README.md

Friendship-Signal-Bracelets

Friendship Signal Bracelets, which as the name suggests, light up when a bestie is nearby.

Built for Macondo Hack Club

Description

Two (or more) bracelets that light up, vibrate, and/or display a pattern when they come within ~3-5 meters of each other, using BLE (Bluetooth Low Energy) RSSI-based proximity detection.

Features

  • Proximity Detection - BLE RSSI(Bluetooth Low Energy Received Signal Strength Indicator) to detect nearby besties
  • Cool lights(6 LEDs) when your bestie is nearby
  • OLED Display(You can see which bestie is nearby!)
  • Audio beeping(Buzzer) when your friend is nearby
  • Microphone

Hardware

  • Seeed Xiao ESP32-C3
  • SSD1306 0.96" OLED
  • WS2812B-V6 LEDs
  • ICS-43434 Mems Microphone
  • ISM303DACTR Accelerometer
  • SPX3819M5-L-1-8 LDO
  • LSF0108PWR Level Shifter
  • 250mAh LiPo Battery

Bill of Materials (BOM)

DesignatorPartQtyCost (each)TotalLinkLCSC #
U1Seeed Xiao ESP32-C31$4.99$4.99https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.htmlN/A
U2SSD1306 0.96" OLED1$2.24$2.24https://www.lcsc.com/product-detail/C5248080.htmlC5248080
SW1Tactile Push Button1$0.56$0.56https://www.lcsc.com/product-detail/C2888493.htmlC2888493
BT1LiPo 250mAh Battery1$8.99$8.99https://www.amazon.com/EEMB-Battery-Rechargeable-Lithium-Connector/dp/B08FD3V6TFN/A
PCBPCB Board5$0.80$4https://www.jlcpcb.comN/A
C1,C2,C3100nF Capacitor3$0.0086$0.86(Min order of 100)https://www.lcsc.com/product-detail/C60474.htmlC60474
C4220nF Capacitor1$0.0238$1.19(Min order of 100)https://www.lcsc.com/product-detail/C64705.htmlC64705
C510µF Capacitor1$0.0372$0.74(Min order of 20)https://www.lcsc.com/product-detail/C192100.htmlC192100
C610nF Capacitor1$0.016$0.8(Min order of 50)https://www.lcsc.com/product-detail/C100042.htmlC100042
LED1-6WS2812B-V6 LED6$0.1011$1.01(Multiple order of 5s)https://www.lcsc.com/product-detail/C52917433.htmlC52917433
R1100kΩ Resistor1$0.0061$0.62(Min order of 100)https://www.lcsc.com/product-detail/C60491.htmlC60491
U3ICS-43434 Microphone1$4.66$4.66https://www.lcsc.com/product-detail/C5656610.htmlC5656610
U4ISM303DACTR Accelerometer1$4.04$4.04https://www.lcsc.com/product-detail/C2913653.htmlC2913653
U5SPX3819M5-L-1-8 Voltage Regulator1$0.1437$0.72(Min order of 5)https://www.lcsc.com/product-detail/C24639.htmlC24639
U6LSF0108PWR Level Shifter1$0.5849$0.5849https://www.lcsc.com/product-detail/C190219.htmlC190219
BUZZER11207-P6.5MM Buzzer1$0.0317$0.32(Min order of 10)https://www.lcsc.com/product-detail/C49246964.htmlC49246964
ShippingN/A1Seeed($6.5) + LCSC($9.58) + Amazon($7.95) + JLCPCB($3.12)N/AN/AN/A
Total CostsN/A111.49+16.94+7.12+27.98$63.53N/AN/A

Firmware

Basic functional firmware in /firmware/friendship_bracelet.ino.

Steps To Reproduce

  1. Order all the components from the BOM
  2. Download the gerbers.zip from Production folder and order a pcb from whatever manufacturer(JLCPCB)
  3. Solder the components onto the PCB
  4. Download the enclosure from Production folder and print using PETG or TPU
  5. Order watch strap adapters
  6. Assemble the case, sand down the bottom and top parts and hot glue the together. The PCB will fit snugly
  7. Flash the Firmware onto the PCB
  8. Now repeat steps 1 and 7 for a second bracelet
  9. Enjoy!

Schematic

image

PCB

image

PCBA

image

Case

image

Demo Video

Parts

25
QtyValueFootprintReferences
6WS2812B-V6easyeda2kicad:LED-SMD_4P-L5.0-W5.0-TL-ALED1, LED2, LED3, LED4, LED5, LED6
3100nFeasyeda2kicad:C0402C1, C2, C3
2TestPointTestPoint:TestPoint_Pad_D2.5mmVdd_IO1, Vdd1
1100kΩeasyeda2kicad:R0402R1
110nFeasyeda2kicad:C0603C6
110uFeasyeda2kicad:CAP-TH_BD5.0-P2.00-D0.8-FDC5
11207-P6.5MMeasyeda2kicad:BUZ-TH_BD12.5-P6.50-D1.4BUZZER1
1220nFeasyeda2kicad:C0603C4
1Battery_CellConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1HS96L03W2C03easyeda2kicad:OLED-TH_L27.8-W27.2-P2.54_C9900033791U2
1ICS-43434_C5656610easyeda2kicad:MIC-SMD_6P-L3.5-W2.7-P0.90-BLU3
1ISM303DACTReasyeda2kicad:VLGA-12_L2.0-W2.0-P0.50-BLU4
1LOGOLOGOG***
1LSF0108PWReasyeda2kicad:TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BLU6
1SPX3819M5-L-1-8easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-TLU5
1SW_Pusheasyeda2kicad:SW-TH_4P-L4.5-W4.5-P3.00-LS4.8SW1
1XIAO-ESP32-C3-SMDSeeed_Studio_XIAO_Series:XIAO-ESP32-C3-DIP-SMDU1

Similar boards

  • 2 layers49 × 59.5 mmTilt, the printed circuit board in 3D

    Tilt

    Sealflux/Tilt

    A motion controlled keychain game console.

    17 partsMIT
  • 2 layers56.8 × 66.2 mmTamagotchi, the printed circuit board in 3D

    Tamagotchi

    TaniWanKenobi/tamagotchi

    A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!

    14 parts5
  • 2 layers50 × 75 mmVideocraft PetPad, the printed circuit board in 3D

    Videocraft PetPad

    Videocraft10/PetPad

    Custom Made Tamagotchi Like Device

    13 parts2MIT
  • 2 layers70.6 × 76 mmTamagotchi, the printed circuit board in 3D

    Tamagotchi

    Er1n-jpg/Psyduck-gotchi

    Tamagotchi project made for fallout

    11 parts1
  • 2 layers64.3 × 76.8 mmTamagotchi, the printed circuit board in 3D

    Tamagotchi

    shelxty/lego-tamagotchi

    Simple tamagotchi with OLED display screen, buzzer, and 3 buttons custom-made in KiCad, with parts assembled in OnShape.

    10 parts1
  • 2 layersReleastic tamagotchi, the printed circuit board in 3D

    Releastic tamagotchi

    alex-technologia/Realistic-tamagochi

    A tamagochi but much more realistically accurate

    10 parts
  • 2 layers74.4 × 97.8 mmTamagotchi, the printed circuit board in 3D

    Tamagotchi

    Ayush09S/Tamagotchi

    A small digital pet as a physical device remake! It features an LDR that can detect light changes, four buttons, and a buzzer. It also has an OLED display!

    16 partsMIT
  • 2 layers95.6 × 69.3 mmFallout pcb, the printed circuit board in 3D

    Fallout pcb

    Er1n-jpg/Fallout-pcb

    12 parts

Questions

How big is the FriendshipBracelet PCB?

It measures 63 × 53.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FriendshipBracelet use?

25 parts, built around the HS96L03W2C03, SPX3819M5-L-1-8, WS2812B-V6 and 1207-P6.5MM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FriendshipBracelet KiCad files?

From the Sealflux/Friendship-Signal-Bracelets repository on GitHub, at the commit this page was made from: the board is PCB/FriendshipBracelet.kicad_pcb and its schematic PCB/FriendshipBracelet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FriendshipBracelet design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).