Skip to the content
2 layers148.5 × 100.9 mmScyboard, the printed circuit board in 3D

A custom split ergomech keyboard

Size
148.5 × 100.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
77
Nets
76
Pads
494
Tracks, vias
460, 44
Routed
Yes
KiCad
KiCad 4.1.0 (file 20240108)
Created
29 May 2025
Updated
28 Dec 2025

Overview

Scyboard is an open-source printed circuit board by Scybin, from the Scybin/scyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 148.5 × 100.9 mm with 77 parts on 76 nets, routed with 460 tracks and 44 vias.

Its parts include 44 diodes and 22 switches. It belongs with the keyboards and input boards of this library.

README

README.md

scyboard

scyboard scyboard_plated

📚 Table of Contents

[blocked]

⚠️ Disclaimer

This project has reached the fully working prototype stage. All core features have been tested and function as intended. However, as with any DIY hardware project, you should carefully review all files before manufacturing or assembly. The author(s) cannot guarantee flawless operation in every environment or configuration.

The author(s) take no responsibility for any damage, issues, or legal trouble that might result from using this project (see the license). Be sure to follow local laws regarding radio frequencies and DIY electronics.

[blocked]

⌨️ Welcome

Scyboard is a custom, open-source mechanical keyboard designed for ergonomic comfort and wireless functionality. Inspired by the Sweep and Corne keyboards, scyboard builds on these layouts and design principles. Every aspect was created using open-source tools, making it easy to modify, build, and share.

[blocked]

⚙️ Features

  • Compact layout optimized for ergonomics
  • ZMK firmware support
  • USB-C connectivity & battery charging
  • Bluetooth compatible
  • Customizable keymaps, layers, and macros
  • Layout is declared using Ergogen
  • KiCad traces auto-routed using Freerouting
  • Open source

[blocked]

📊 Project Status

The prototype has been built successfully. All aspects of the keyboard and firmware behave as expected.

[blocked]

📦 Parts List

I am not sponsored or affiliated with the vendors linked below. This is where I prefer to purchase my products.

PartQuantityDescriptionPurchase LinkDatasheet
Microcontroller2nice!nano v2.0Nice Keyboarrds nice!nano v2.0Nordic nRF52840
Pin Headers4Controller socketing systemMAC8 spring-loaded pin headersMAC8 spring-loaded pin headers specifications
Reset Button2Panasonic miniature momentary buttonPanasonic Reset ButtonEVQPUC02K
Power Switch2Alps miniature SPDT switchALPS Powr SwitchSSSS811101
Battery Jack2JST PH 2.0mmJST Battery JackJST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal
Battery23.7V LiPo 110mAh (w/ JST adapter)Liter Bihuade Lithium Battery301230
Diode44SMD DiodeSemtech SMD DiodesSOD-123
Hotswap Socket44Kailh Choc PCB SocketKailh Hotswap Sockets1350Connector
Choc V1/V2 Switch44Kailh ChocLowprokb Ambients Silent Choc Switches
Choc Keycap4440 x 1u, 4 x 1.5uFK MBK Choc Keycaps
Nut (optional)12Inserts for bottom caseuxcell Knurled Insert Nuts
M2X3 Screw (optional)24Screws for bottom caseCO-RODE Screw Kit
M2X4 Screw (optional)12Screws for bottom caseCO-RODE Screw Kit
M2X6 Standoff (optional)10Standoffs for plateuxcell M2x6 Standoffs
Bottom Case (optional)23D printed bottom caseCase STL Found Here
Plate (optional)23D printed platePlate STL Found Here
Screw Spacers (optional)123D printed spacersScrew Spacer STL Found Here

[blocked]

🛠️ Build Guide

For assembling the keyboard hardware, I recommend following the guide for the Corne keyboard, as the assembly process is similar. You can find the guide here: corne-cherry v2 buildguide

In addition, here are some specific notes for the scyboard:

  • There will be slight differences in the assembly process due to the different components used, but the overall steps will be similar.
  • Place the nice!nano V2 microcontroller face down (flat side facing up).
  • Solder the MCU jumper pads on the same (top) side of the PCB where the MCU wis mounted.
  • Solder the JST battery connector jumpper pads on the opposite (back) side of the PCB where the MCU is mounted.

You can use the 3D printed bottom case without a plate. This requires M2x4 screws on the top, M2X3 screws on the bottom, knurled insert nuts, and 3D printed screw spacers. To mount the PCB directly to the case, use the 3D printed screw spacers between the screw and PCB.

screw_spacer assembled_case

If you want to add a plate to the build, you can replace the nuts and spacers by using M2x6 standoffs. I included files for a plate if you decide to go this route. You will need one insert nut and spacer for the hole next to the JST connector since the plate does not cover this area.

[blocked]

💾 Firmware

A ZMK module for this keyboard is available at:
zmk-keyboard-scyboard

To get started, add the module to your west.yaml file and follow the flashing instructions in the ZMK docs.

[blocked]

🙏 Thanks

  • Ergogen: For keyboard PCB generation and configuration.
  • Ceoloide: For providing footprints. An additional thanks for code inspiration.
  • ZMK Firmware: For providing the open-source keyboard architecture support.
  • KiCad: For PCB viewing and editing.
  • Freerouting: For PCB auto-routing in KiCad.
  • typeractive: For design and parts inspiration.
  • Sweep by David Philip Barr: For key matrix and column stagger inspiration.
  • Corne by foostan: For thumb cluster inspiration.
  • FlatFootFox: For an Ergogen tutorial.
  • nickcoutsos: For the ZMK Keymap Editor browser app.
  • joe-scotto: For a 3d model library
  • Open Source Community: For sharing knowledge, scripts, and inspiration.

[blocked]

📄 License

This project is licensed under the MIT License. See the LICENSE file for details.

Parts

77
QtyValueFootprintReferences
44—ceoloide:diode_tht_sod123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +28
22—ceoloide:switch_choc_v1_v2S1, S2, S3, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22 +6
6—ceoloide:mounting_hole_npthMH1, MH2, MH3, MH4, MH5, MH6
1—ceoloide:battery_connector_jst_ph_2JST1
1—ceoloide:mcu_nice_nanoMCU1
1—ceoloide:utility_ergogen_logoLOGO1
1—ceoloide:power_switch_smd_sidePWR1
1—ceoloide:reset_switch_smd_sideRST1

More from Scybin/scyboard

1
  • 2 layers148.5 × 100.9 mmScyboard, the printed circuit board in 3D

    Scyboard

    Scybin/scyboard

    A custom split ergomech keyboard

    77 parts10MIT

Similar boards

  • 2 layers75 × 100 mmPhased, the printed circuit board in 3D

    Phased

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    77 parts530
  • 2 layers64 × 55 mmZynthiandac, the printed circuit board in 3D

    Zynthiandac

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    77 parts156
  • 2 layers44 × 86 mmSteiner parker vcf, the printed circuit board in 3D

    Steiner parker vcf

    shmoergh/hog

    Fully analog two-voice monophonic synth for live performances

    77 parts124
  • 2 layers94 × 40.6 mmMulti adapter, the printed circuit board in 3D

    Multi adapter

    osiweb/unified_retro_keyboard

    Project to provide keyboard replacements for various classic computers, as well as classic ASCII keyboard

    77 parts122
  • 2 layers214.9 × 96.1 mmBad wings slim, the printed circuit board in 3D

    Bad wings slim

    hazels-garage/bad-wings

    Bad Wings

    77 parts107CC-BY-SA-4.0
  • 2 layers97.2 × 81.3 mmTeensythumbboard, the printed circuit board in 3D

    Teensythumbboard

    AnthonyDiGirolamo/teensy-thumb-keyboard

    Handheld tactile switch keyboard for Teensy 3.2 compatible boards.

    77 parts93GPL-3.0
  • 2 layers39.4 × 43.2 mmBetula Output, the printed circuit board in 3D

    Betula Output

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    77 parts83
  • 2 layers100.3 × 49.1 mmTP EVALBOARD R01, the printed circuit board in 3D

    TP EVALBOARD R01

    OV-Tech-GmbH/OVT13

    Open-source thin-and-light 13" laptop

    77 parts79CERN-OHL-S-2.0

Questions

How big is the Scyboard PCB?

It measures 148.5 × 100.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Scyboard use?

77 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Scyboard KiCad files?

From the Scybin/scyboard repository on GitHub, at the commit this page was made from: the board is ergogen/output/pcbs/scyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Scyboard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).