Skip to the content
2 layers87.2 × 93.9 mmLED controller, the printed circuit board in 3D

Its a combination of two different multivibrator circuits which control 2 LEDs!

Size
87.2 × 93.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
22
Pads
78
Tracks, vias
191, 7
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Mar 2026
Updated
29 Mar 2026

Overview

LED controller is an open-source printed circuit board by Sash-Reek2010, from the Sash-Reek2010/The-Reek-LED-Control-Contraption repository on GitHub. It is a 2-layer board of 87.2 × 93.9 mm with 33 parts on 22 nets, routed with 191 tracks and 7 vias.

Its parts include 16 resistors, 8 transistors, 4 capacitors, 2 diodes and 2 switches.

README

README.md

The Reek LED Control Contraption

This project is basically a controller which switches between two different oscillations for two LEDs. One switch leads it to being in constant oscillation between the two circuits. The other switch makes the oscillations creepy and kinda random.
Screenshot 2026-03-18 200943

The circuit!

This circuit consists of 16 resistors of various resistances, 6 transistors and 4 capacitors of various capacitances as the main parts and then the inputs and outputs. A more detailed list is given in the BOM. The entire circuit is basically just 3 multivibrators working together! The main bistable circuit acts as the switch that transfers current between the two different oscillation "modes". Then the current triggers a transistor which allows the 5V to pass through an astable circuit. There are two astable circuits with different combinations of resistors and capacitors. The outputs of both the astable circuits lead to two LEDs which provide as the output in this circuit!
circuit1

Try it out!

I made this in the falstad circuit generator! The link is down below.
https://is.gd/1EUmVZ

Schematic

The Schematic was made in KiCad!
Screenshot 2026-03-18 222541

PCB

I decided to make the PCB the shape of the chrome dino with the LEDs as it's eyes. But the dino only has one eye so I just improvised the other one's position! Screenshot 2026-03-18 200929 Screenshot 2026-03-18 201047

Thanks for reading! -Sashreek :3

Parts

33
QtyValueFootprintReferences
8NPNPackage_TO_SOT_THT:TO-92L_Inline_WideQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
310kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR6, R14, R15
21.5Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC3, C4
2100Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2
21kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR4, R5
2330Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR9, R12
24.7kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR10, R11
26.8Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2
2680Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR13, R16
2LEDLED_THT:LED_D5.0mmD1, D2
2RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR7, R8
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2
16.8kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the LED controller PCB?

It measures 87.2 × 93.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED controller use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED controller KiCad files?

From the Sash-Reek2010/The-Reek-LED-Control-Contraption repository on GitHub, at the commit this page was made from: the board is src/Kicad/LED controller.kicad_pcb and its schematic src/Kicad/LED controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sash-Reek2010 before reusing the design.