Skip to the content
2 layers25.5 × 20.5 mmMCU IO Control, the printed circuit board in 3D

Structured KiCAD and PCB design training projects documenting my progression from fundamentals to manufacturable boards.

Size
25.5 × 20.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
7
Pads
19
Tracks, vias
19, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
18 May 2026
Updated
30 Jun 2026

Overview

MCU IO Control is an open-source printed circuit board by Sarkis-S, from the Sarkis-S/KiCAD-Training repository on GitHub. It is a 2-layer board of 25.5 × 20.5 mm with 8 parts on 7 nets, routed with 19 tracks and 0 vias.

Its parts include 3 resistors, 2 connectors, 1 diode, 1 transistor and 1 switch.

README

README

KiCAD Training

Structured hardware engineering training repository combining PCB design and hardware validation labs.

This repository documents a progressive learning path designed to build strong foundations in both PCB engineering and embedded hardware reasoning.

The training is intentionally split into two parallel tracks:

  • PCB_Designs → schematic design, PCB layout, routing, manufacturing preparation
  • Hardware_Labs → physical validation of electronics and embedded concepts through breadboard experimentation

Together, these tracks build both theoretical understanding and practical engineering intuition.


Repository Structure

PCB_Designs

Focused on building strong PCB design fundamentals using KiCAD.

Core areas:

  • schematic design and circuit architecture
  • PCB layout and routing discipline
  • component selection and footprint mapping
  • signal flow clarity (input → logic → output)
  • design validation (ERC / DRC)
  • manufacturing preparation (Gerbers, drills)
  • hardware documentation and reasoning
  • Git-based version control for hardware workflows

PCB design teaches how to build clean, manufacturable systems.


Hardware_Labs

Focused on validating hardware concepts physically using Arduino, breadboards, and real components.

Core areas:

  • signal behavior
  • input conditioning
  • electrical switching
  • MCU logic
  • firmware interaction
  • real-world debugging

Hardware labs teach how circuits behave in reality.

This track exists because KiCAD alone is not enough—real engineering requires understanding both schematic design and physical behavior.


Completed PCB Projects

LED_Board_V1 — PCB Foundations

First complete KiCAD workflow.

Focus:

  • basic LED circuit
  • first schematic-to-PCB workflow

Key learning:

  • schematic capture
  • footprint assignment
  • board outline creation
  • PCB routing basics
  • Gerber and drill generation
  • basic DRC workflow

Status: Complete


LED_Board_V2 — Transistor Switching Foundations

LED switching using transistor control.

Focus:

  • transistor-controlled LED switching
  • control signal separated from load path

Key learning:

  • transistor switching fundamentals
  • base resistor selection
  • pull-down resistor logic
  • controlled current paths

Status: Complete


LED_Driver_Transistor — MCU-Compatible Driver

Refined transistor switching architecture for microcontroller integration.

Focus:

  • cleaner switching design
  • MCU-compatible input header
  • improved PCB structure

Key learning:

  • reusable switching architectures
  • control vs power separation
  • scalable design thinking

Status: Complete


MotorDriver_FlybackDiode — Inductive Load Protection

Motor switching circuit with inductive protection.

Focus:

  • DC motor switching
  • flyback diode protection

Key learning:

  • back-EMF behavior
  • inductive load behavior
  • protection circuit design
  • safe switching under transient conditions

Status: Complete


MCU_IO_Control — Input to Output System Design

MCU-based control system with structured signal flow.

Focus:

  • button input stage
  • MCU logic stage
  • transistor output stage

Key learning:

  • embedded control architecture
  • GPIO behavior
  • system-level schematic readability
  • modular hardware design

Status: Complete


MPU6050_Motion_Sensor — Sensor Interface Design

I2C-based sensor interface board using MPU-6050.

Focus:

  • I2C communication routing
  • pull-up resistor integration
  • sensor breakout design

Key learning:

  • SDA / SCL routing discipline
  • I2C bus behavior
  • pull-up resistor importance
  • 3.3V power domain handling
  • ground plane usage
  • multi-layer routing awareness

Status: Complete


Hardware Labs

These labs were introduced to strengthen practical understanding beyond schematic and PCB design.

The goal is to bridge the gap between theory and physical behavior.


1 — First Light

First successful hardware interaction.

Focus:

  • LED control fundamentals
  • current flow visualization

Key learning:

  • polarity
  • current limiting resistors
  • LED behavior

Status: Complete


2 — The Gatekeeper

Introduction to logic-based control.

Focus:

  • input-driven decisions
  • conditional control flow

Key learning:

  • digital logic states
  • HIGH vs LOW behavior
  • basic decision-making

Status: Complete


3 — The Trigger

Input event detection.

Focus:

  • button input behavior
  • trigger detection

Key learning:

  • pull-up vs pull-down
  • floating inputs
  • stable signal acquisition

Status: Complete


4 — The Memory Keeper

State persistence across runtime.

Focus:

  • retaining information between loops

Key learning:

  • variable persistence
  • state storage
  • embedded memory concepts

Status: Complete


5 — The Mode Controller

Multi-state embedded control.

Focus:

  • state-based behavior switching

Key learning:

  • edge detection
  • debounce
  • state machines
  • PWM fundamentals

Status: Complete


6 — The Position Controller

Actuator positioning and motion control.

Focus:

  • servo-based position control
  • controlled angular movement
  • position-based state transitions

Key learning:

  • positional control logic
  • PWM-based actuation
  • servo signal behavior
  • angle-to-command mapping
  • motion control fundamentals

Status: Complete


Training Outcome

This training established strong foundational competency in:

  • PCB design workflow
  • routing strategy
  • transistor switching
  • inductive load protection
  • MCU interface design
  • sensor integration
  • state-machine logic
  • hardware debugging methodology
  • embedded systems reasoning

Tools

  • KiCad⁠ (schematic + PCB design)
  • Arduino IDE⁠ (firmware development)
  • Git⁠ (version control)
  • GitHub⁠ (project tracking)
  • Visual Studio Code⁠ (documentation + workflow)

Next Stage

The next phase continues in a separate Embedded Systems repository focused on:

  • firmware development
  • Arduino and ESP32 systems
  • PWM control systems
  • signal analysis
  • communication protocols (I2C, SPI, UART)
  • wireless systems (Wi-Fi, Bluetooth, RF)

This repository serves as the completed hardware foundation before transitioning into deeper embedded systems development.

Parts

8
QtyValueFootprintReferences
11kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1LEDLED_SMD:LED_0603_1608MetricD1
1MCU_INConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1MCU_OUTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Q_NPN_CBEPackage_TO_SOT_THT:TO-92_InlineQ1
1R_LEDResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1R_Pull (10kΩ)Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1SW_PushButton_Switch_SMD:SW_Push_1P1T_XKB_TS-1187ASW1

More from Sarkis-S/KiCAD-Training

5
  • 2 layers20 × 17 mmLED Board V2, the printed circuit board in 3D

    LED Board V2

    Sarkis-S/KiCAD-Training

    Structured KiCAD and PCB design training projects documenting my progression from fundamentals to manufacturable boards.

    6 parts1
  • 2 layers21.5 × 12.5 mmLED Driver Transistor, the printed circuit board in 3D

    LED Driver Transistor

    Sarkis-S/KiCAD-Training

    Structured KiCAD and PCB design training projects documenting my progression from fundamentals to manufacturable boards.

    5 parts1
  • 2 layers24.5 × 21.5 mmMotorDriver FlybackDiode, the printed circuit board in 3D

    MotorDriver FlybackDiode

    Sarkis-S/KiCAD-Training

    Structured KiCAD and PCB design training projects documenting my progression from fundamentals to manufacturable boards.

    5 parts1
  • 2 layers82.5 × 70 mmI2C Sensor Reader, the printed circuit board in 3D

    I2C Sensor Reader

    Sarkis-S/KiCAD-Training

    Structured KiCAD and PCB design training projects documenting my progression from fundamentals to manufacturable boards.

    4 parts1
  • 2 layers21 × 20 mmLED Board V1, the printed circuit board in 3D

    LED Board V1

    Sarkis-S/KiCAD-Training

    Structured KiCAD and PCB design training projects documenting my progression from fundamentals to manufacturable boards.

    3 parts1

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the MCU IO Control PCB?

It measures 25.5 × 20.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MCU IO Control use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MCU IO Control KiCad files?

From the Sarkis-S/KiCAD-Training repository on GitHub, at the commit this page was made from: the board is PCB_Designs/MCU_IO_Control/source/MCU_IO_Control.kicad_pcb and its schematic PCB_Designs/I2C_Sensor_Reader/source/I2C_Sensor_Reader.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MCU IO Control design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sarkis-S before reusing the design.