
CRPA17 4CH LBAND
Sanu0910/RFMW-ANT- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 236
- Nets
- 149
- Pads
- 802
- Tracks, vias
- 839, 2,091
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Aug 2025
- Updated
- 6 Nov 2026
Overview
CRPA17 4CH LBAND is an open-source printed circuit board by Sanu0910, from the Sanu0910/RFMW-ANT repository on GitHub. It is a 4-layer board with 236 parts on 149 nets, routed with 839 tracks and 2,091 vias.
It is built around the TQP3M9037, HC125A and DXP.02.A, with the 1.5SMC6.8A and AO3401A among its other parts. Its parts include 94 capacitors, 52 inductors, 16 ICs, 9 resistors and 5 connectors.
Main components
5TQP3M9037
DFN-8-EP(2x2)-40℃~+105℃ 0.4dB 10dB 11dB 20dB 20dBm 35dBm 3V~5V 700MHz~6GHz 70mA Low power mode、Linearization design、Bias control circuit DFN-8-EP(2x2) RF Amplifiers ROHSQorvoRF AmplifiersHC125A
SMD-4PSMD-4P New Arrivals ROHSTaoglasUncategorisedDXP.02.A
-UncategorisedTaoglas1.5SMC6.8A
DO-214AB(SMC)-65℃~+150℃ 1 1.5kW@10/1000us 10.5V 143A 1mA 5.8V 6.45V IEC 61000-4-2 TVS Unidirectional DO-214AB(SMC) ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
236| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | 100pF | C_0402_1005Metric | C143, C1111, C1112, C1113, C1121, C1122, C1123, C1131, C1211, C1212, C1213, C1221, C1222, C1223, C1231, C2111 +44 |
| 24 | 6.8nH | L_0402_1005Metric | L144, L244, L1215, L1216, L1225, L1226, L1235, L2215, L2216, L2225, L2226, L2235, L3215, L3216, L3225, L3226 +8 |
| 16 | 18nH | L_0603_1608Metric | L111, L112, L121, L122, L211, L212, L221, L222, L311, L312, L321, L322, L411, L412, L421, L422 |
| 16 | 1uF | C_0402_1005Metric | C1114, C1124, C1214, C1224, C2114, C2124, C2214, C2224, C3114, C3124, C3214, C3224, C4114, C4124, C4214, C4224 |
| 16 | TQP3M9037 | TQP3M9037_DFN8_2x2 | U111, U112, U121, U122, U211, U212, U221, U222, U311, U312, U321, U322, U411, U412, U421, U422 |
| 12 | B7504 | B7504_SAW_0.9x0.7 | FL111, FL112, FL113, FL211, FL212, FL213, FL311, FL312, FL313, FL411, FL412, FL413 |
| 12 | B8889 | B8889_SAW_1.1x0.9 | FL121, FL122, FL123, FL221, FL222, FL223, FL321, FL322, FL323, FL421, FL422, FL423 |
| 8 | 49.9R | R_0402_1005Metric | R11, R12, R21, R22, R31, R32, R41, R42 |
| 8 | CLM-83-2W+ | MiniCircuits_DL1721 | LM11, LM12, LM21, LM22, LM31, LM32, LM41, LM42 |
| 8 | HC125A | HC125A | HY11, HY12, HY21, HY22, HY31, HY32, HY41, HY42 |
| 4 | 1.0pF | C_0402_1005Metric | C142, C242, C342, C442 |
| 4 | 1.5pF | C_0402_1005Metric | C144, C244, C344, C444 |
| 4 | 10uF | C_0805_2012Metric | C190, C290, C390, C490 |
| 4 | 3.3nH | L_0402_1005Metric | L142, L242, L342, L442 |
| 4 | 4.3nH | L_0402_1005Metric | L143, L243, L343, L443 |
| 4 | 4.7nH | L_0402_1005Metric | L141, L241, L341, L441 |
| 4 | 600R@100MHz | L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 4 | DNP | C_0402_1005Metric | C141, C241, C341, C441 |
| 4 | DXP.02.A | DXP.02.A | DX1, DX2, DX3, DX4 |
| 4 | L1/L2 stacked patch | GNSS_StackedPatch_L1L2_4feed | ANT1, ANT2, ANT3, ANT4 |
| 4 | SMA | SMA_Amphenol_132134_Vertical | J1, J2, J3, J4 |
| 3 | Fiducial_1mm_Mask2mm | Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | TP | TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | +5V IN | Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J5 |
| 1 | 1.5SMC6.8A | D_SMC | D1 |
| 1 | 100nF | C_0402_1005Metric | C2 |
| 1 | 10k | R_0402_1005Metric | R5 |
| 1 | 22uF | C_1206_3216Metric | C1 |
| 1 | 2A hold | Fuse_1812_4532Metric | F1 |
| 1 | AO3401A | SOT-23 | Q1 |
More from Sanu0910/RFMW-ANT
4- 4 layers60 × 45 mm

- 2 layers60 × 45 mm

- 4 layers100 × 60 mm

- 2 layers70 × 56 mm

Similar boards
- 6 layers200 × 75 mm

- 4 layers100 × 100 mm

HGS Reflector
oresat/oresat-live-handheld-ground-station
MCAD, ECAD, software, firmware, build instructions, and everything else you should need for the OreSat Live Handheld Ground Station project.
64 parts20GPL-3.0 - 4 layers18.8 × 18.8 mm

- 4 layers52 × 68.4 mm

Bidirectional Amp
oresat/oresat-dxwifi-hardware
OreSat hardware for high speed data communications using 2.4 GHz WiFi.
135 parts19GPL-3.0 - 2 layers192.2 × 150.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 6 layers237.9 × 80.5 mm

XG Mobile Dock
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
300 parts712CC-BY-4.0 - 2 layers60 × 111.3 mm

Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0
Questions
What parts does the CRPA17 4CH LBAND use?
236 parts, built around the TQP3M9037, HC125A, DXP.02.A and 1.5SMC6.8A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CRPA17 4CH LBAND KiCad files?
From the Sanu0910/RFMW-ANT repository on GitHub, at the commit this page was made from: the board is projects/17_crpa-4ch-lband-active-pcb/KiCad/CRPA17_4CH_LBAND.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CRPA17 4CH LBAND design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sanu0910 before reusing the design.