

ECU FINALL
PCB design using Ki_cad
- Size
- 90.3 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 61
- Pads
- 164
- Tracks, vias
- 405, 31
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Oct 2025
- Updated
- 8 Jul 2026
Overview
ECU FINALL is an open-source printed circuit board by Sambit-cloud, from the Sambit-cloud/KI_cad repository on GitHub. It is a 2-layer board of 90.3 × 78 mm with 38 parts on 61 nets, routed with 405 tracks and 31 vias.
It is built around the TJA1051T, IRLZ44N and G5PZ-1A DC12. Its parts include 10 resistors, 8 connectors, 6 ICs, 3 transistors and 2 capacitors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedG5PZ-1A DC12
插件,10.3x23.8mm-40℃~+70℃ 1 Set Normally Open: 1A (SPST NO) 12V 15ms 16A 250V@AC 5ms 插件,10.3x23.8mm Power Relays ROHSOmronPower Relays
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R6, R7, R12, R14 |
| 5 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5 |
| 4 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3, JP4 |
| 3 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 3 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J4, J4, J4 |
| 2 | G5PZ-1A_DC12 | G5PZ-1A_DC12:G5PZ_OMR | K1, K3 |
| 2 | M4 | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H2, H4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J19 |
| 1 | 0.1uf | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 4013 | Package_DIP:DIP-14_W7.62mm | U18 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_01x14_MountingPin | Connector_Molex:Molex_KK-254_AE-6410-14A_1x14_P2.54mm_Vertical | J1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP4725xxx-xCH | MCP4725_I2C_DAC:MCP4725_I2C_DAC_THT | U8 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | TJA1051T | TJA1051T_(trans_rx):TJA1051T_THT | U4 |
| 1 | Teensy4.0 | Teensy:teensy_holder | U1 |
More from Sambit-cloud/KI_cad
2- 2 layers131.5 × 127.5 mm

- 2 layers

Similar boards
- 2 layers150 × 50 mm

- 4 layers105 × 55 mm

MotorKit
zhbi98/ODriveX
【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。
184 parts22MIT - 2 layers65 × 40 mm

- 4 layers42 × 42 mm

Motor42
zhbi98/Motor42
【小型 42mm 伺服电机】支持 RS485 和 CAN 协议的闭环功能的步进电机,支持功率和通信级联(节点串联连接),适用于 3D 打印机,舵机,小型机械臂
89 parts8MIT - 2 layers70.1 × 45.8 mm

- 2 layers54.6 × 86.4 mm

- 2 layers114 × 95 mm

- 2 layers66 × 80.7 mm

JO1 PCB
CEJ2-Robotics/JO1_Electronics
This repository contains the PCB layout for a shield-style board designed to interface with the NUCLEO-H745ZI-Q development board.
34 parts2
Questions
How big is the ECU FINALL PCB?
It measures 90.3 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ECU FINALL use?
38 parts, built around the TJA1051T, IRLZ44N and G5PZ-1A DC12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ECU FINALL KiCad files?
From the Sambit-cloud/KI_cad repository on GitHub, at the commit this page was made from: the board is ECU_FINALL.kicad_pcb and its schematic BSPD_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ECU FINALL design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sambit-cloud before reusing the design.