2 layers138.1 × 114.3 mm
2 layers230 × 120 mm
MatrixRigs v2
SaleemLab/MatrixRigsDocs related to setting up and running the matrix rigs
- Size
- 230 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 101
- Pads
- 426
- Tracks, vias
- 283, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Feb 2023
- Updated
- 23 Jan 2026
Overview
MatrixRigs v2 is an open-source printed circuit board by SaleemLab, from the SaleemLab/MatrixRigs repository on GitHub. It is a 2-layer board of 230 × 120 mm with 67 parts on 101 nets, routed with 283 tracks and 0 vias.
Its parts include 32 connectors, 3 diodes, 2 capacitors and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn_Coaxial | easyeda2kicad:CONN-TH_1-1337541-0 | J3, J6, J9, J10, J15, J16, J23, J24, J25, J26 |
| 8 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2, J27, J28, J29, J30, J31, J32 |
| 6 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7, J8, Valve logic in1, Valve logic in2, Vout, Vout |
| 6 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J12, J13, Load1, Load2, Valve Output1, Valve Output2 |
| 4 | Conn_02x10_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | GND +5V1, GND +5VB1, Gnd 3V3, Gnd 12V1 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | 10-100kohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Gate R1, Gate R2, R8 |
| 3 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | Signal Splitters, SignalSplitter2, SignalSplitter3 |
| 3 | LED | LED_THT:LED_D5.0mm | D3, Indicator LED1, Indicator LED2 |
| 2 | 560ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | IR LED -1, IR LED -560 |
| 2 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | Lickport1, Lickport2 |
| 2 | Conn_01x09_Socket | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | Valve Driver1, ValveDriver_2 |
| 2 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | NMOS-T220, Q3 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | VoltageDivider_R1_1, VoltageDivider_R1_2 |
| 1 | 1kohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | LED R1 ~1K |
| 1 | Arduino_Nano_v3.A | Module:Arduino_Nano | Nano Every A |
| 1 | Arduino_Nano_v3.B | Module:Arduino_Nano | Nano Every B |
| 1 | Barrel_Jack_Switch_Pin3Ring | easyeda2kicad:DC-IN-TH_XDJK-0051-025 | J33 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J4 |
| 1 | PMOS | easyeda2kicad:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 1 | VoltageDivider_R2_1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | VoltageDivider_R2_1 |
| 1 | VoltageDivider_R2_2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | VoltageDivider_R2_2 |
Similar boards
- 2 layers133.1 × 53.8 mm
- 2 layers160 × 100.1 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers65 × 56 mm
Zpui shld wg12864b
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
67 parts253GPL-3.0 - 2 layers138.1 × 89.7 mm
- 2 layers51 × 30 mm
- 2 layers93.5 × 55 mm
- 2 layers58.4 × 101.6 mm
Questions
How big is the MatrixRigs v2 PCB?
It measures 230 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MatrixRigs v2 use?
67 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MatrixRigs v2 KiCad files?
From the SaleemLab/MatrixRigs repository on GitHub, at the commit this page was made from: the board is PCBs/MatrixRigs_v2/MatrixRigs_v2.kicad_pcb and its schematic PCBs/MatrixRigs/MatrixRigs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MatrixRigs v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SaleemLab before reusing the design.