2 layers100 × 98.6 mm
PCB Christmas Tree
KNEAGHUST/PCB_Christmas_Tree_AGH
PCB Christmas tree designed for the AGH University of Krakow
45 parts2MIT
2 layers26 × 7.5 mm
Ipod avr control
Saacman/ipod_avr_control- Size
- 26 × 7.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 34
- Tracks, vias
- 69, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2025
- Updated
- 23 Oct 2025
Overview
Ipod avr control is an open-source printed circuit board by Saacman, from the Saacman/ipod_avr_control repository on GitHub. It is a 2-layer board of 26 × 7.5 mm with 13 parts on 11 nets, routed with 69 tracks and 13 vias.
It is built around the ATTINY402-SSN and AO3401A. Its parts include 4 resistors, 3 capacitors, 3 ICs and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY402-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdipod_avr_control
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | 100N | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATtiny402-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | ~ | custom_library:iPod_Custom | U2 |
| 1 | ~ | custom_library:BT_SW_Custom | U3 |
Similar boards
- 2 layers153.8 × 100.3 mm
- 2 layers48 × 73 mm
- 2 layers
- 2 layers75.8 × 19.2 mm
3S coinCellChargeController
PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.
78 parts36 - 2 layers72 × 47.5 mm
PCB avr dx unbricker
k-takata/PCB_avr_dx_unbricker
UPDI High Voltage programmer for AVR Dx/Ex series
40 parts4 - 2 layers85 × 53 mm
Cccamp23 nametag
HazeCore/Nametag_Hardware
This is the hardware for out Nametag Badge for Chaos Communication Camp 2023. You can find more information about the Project at https://hazeco.re/cccamp-nametag/.
34 parts3 - 2 layers7.4 × 7.3 mm
DCC Dekoder Attiny402 1
markusgruen/DccFunctionDecoder
Open source, Arduino-based DCC function decoder
17 parts3GPL-3.0
Questions
How big is the Ipod avr control PCB?
It measures 26 × 7.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ipod avr control use?
13 parts, built around the ATTINY402-SSN and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ipod avr control KiCad files?
From the Saacman/ipod_avr_control repository on GitHub, at the commit this page was made from: the board is board/board.kicad_pcb and its schematic board/board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ipod avr control design in my own project?
Its repository states no licence, so its author keeps all rights: ask Saacman before reusing the design.