Skip to the content
2 layers35.6 × 31.5 mmEmmc adapter, the printed circuit board in 3D

A Skyhigh S40FC008 flash to SD card breakout board

Size
35.6 × 31.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
13
Pads
40
Tracks, vias
150, 5
Pours
6
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Dec 2023
Updated
26 Dec 2023

Overview

Emmc adapter is an open-source printed circuit board by Ryzzen, from the Ryzzen/S40FC008-to-sd repository on GitHub. It is a 2-layer board of 35.6 × 31.5 mm with 14 parts on 13 nets, routed with 150 tracks and 5 vias.

Its parts include 4 capacitors, 2 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.

README

README.md

SkyHigh S40FC008 flash to sd-card

Parts

14
QtyValueFootprintReferences
31uFCapacitor_SMD:C_0603_1608MetricC2, C3, C4
3FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1, FID2, FID3
2LOGOLOGOG***, G***
110kResistor_SMD:R_0603_1608MetricR1
110uFCapacitor_SMD:C_0603_1608MetricC1
1Conn_01x12_PinConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ2
1Micro_SD_CardVoltlog:microSD_cardJ1
1Red LEDLED_SMD:LED_0603_1608MetricD1
1TLV70218_SOT23-5Package_TO_SOT_SMD:SOT-23-5U1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Emmc adapter PCB?

It measures 35.6 × 31.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Emmc adapter use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Emmc adapter KiCad files?

From the Ryzzen/S40FC008-to-sd repository on GitHub, at the commit this page was made from: the board is emmc-adapter.kicad_pcb and its schematic emmc-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Emmc adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ryzzen before reusing the design.