
Calculator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

add footprint to /footprints folder. then run command below
Nescius66 is an open-source printed circuit board by Ruchi12377, from the Ruchi12377/Nescius66 repository on GitHub. It is a 2-layer board of 160.7 × 128.4 mm with 74 parts on 55 nets.
Its parts include 33 diodes and 33 switches.

ergogen . && for i in output/cases/*.jscad; do npx @jscad/cli@1 "$i" -of stla; doneadd footprint to /footprints folder. then run command below
ergogen .| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | MX | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +17 | |
| 33 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +17 | |
| 4 | — | MountingHole_2.2mm_M2_Pad_Via | _1, _2, _3, _4 |
| 2 | ProMicro | MCU1, MCU2 | |
| 1 | SW_FSM8JH | SW_FSM8JH | B1 |
| 1 | TRRS-PJ-320A-dual | TRRS-PJ-320A-dual | TRRS1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


KaeptnBalu/Arduino_Spot_Welder_V3
This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

/Revision%202.0/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
It measures 160.7 × 128.4 mm and has 2 copper layers, 1.6 mm thick.
74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ruchi12377/Nescius66 repository on GitHub, at the commit this page was made from: the board is output/pcbs/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ruchi12377 before reusing the design.