
REVB V1.00
RoteRuebe/diplomarbeit
Repository mit allen Files für die Diplomarbeit. An der Diplomarbeit arbeiten:

Repository mit allen Files für die Diplomarbeit. An der Diplomarbeit arbeiten:
Controller REVA V1 is an open-source printed circuit board by RoteRuebe, from the RoteRuebe/diplomarbeit repository on GitHub. It is a 2-layer board of 120 × 66 mm with 36 parts on 33 nets, routed with 284 tracks and 1 via.
It is built around the ATMEGA328P-PU. Its parts include 10 connectors, 8 capacitors, 5 resistors, 4 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Repository mit allen Files für die Diplomarbeit. An der Diplomarbeit arbeiten:
Hier sind die Kicad - Platinendesigns von Roboter und Controller zu finden. Beide haben jeweils zwei Versionen, Rev A und Rev B.
Hier werden alle 3D Modelle und Cura 3D Setting sein.
Hier sind alle Codes der Diplomarbeit zu finden. Es gibt Testcodes für einzelne Module sowie die zusamengesetzten Hauptcodes
Außerdem sind die derzeitige Version der Diplomarbeit, Arbeitzeiterfassung (AZE) und der Projektplan hochgeladen.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 330E | Resistor_SMD:R_1206_3216Metric | R4, R5, R6 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R2, R3 |
| 2 | 22p | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 470nF | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 560n | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P7.50mm | C6, C7 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH-12mm_Wuerth-430476085716 | SW1, SW2 |
| 1 | 100n | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P7.50mm | C9 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 300n | Capacitor_THT:C_Disc_D12.5mm_W5.0mm_P7.50mm | C8 |
| 1 | 9V_Connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | APA-106-F5 | LED_THT:LED_D5.0mm-4_RGB | D1 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Auto_Mode_Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | GND | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J12 |
| 1 | Gas_Trigger | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J15 |
| 1 | I2C_LCD_Display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Joystick | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | MCP1703Ax-120xxTT | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U3 |
| 1 | Reserve_Trigger | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J16 |
| 1 | Vcc | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J11 |
| 1 | Vcc_Gas | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Vcc_Reverse | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |

RoteRuebe/diplomarbeit
Repository mit allen Files für die Diplomarbeit. An der Diplomarbeit arbeiten:

RoteRuebe/diplomarbeit
Repository mit allen Files für die Diplomarbeit. An der Diplomarbeit arbeiten:

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 120 × 66 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RoteRuebe/diplomarbeit repository on GitHub, at the commit this page was made from: the board is Hardware/Controller/REVA_V1.00/Controller_REVA_V1/Controller_REVA_V1.kicad_pcb and its schematic Hardware/Controller/REVA_V1.00/Controller_REVA_V1/Controller_REVA_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RoteRuebe before reusing the design.