
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Designed a USB to UART Converter PCB using KiCad 9. The project includes schematic design, PCB layout, and ERC/DRC verification. It provides reliable USB-to-UART communication for programming, debugging, and serial data transfer with ESP32, STM32, Arduino, and other microcontrollers.
USB to uart convertor is an open-source printed circuit board by Rohit85885, from the Rohit85885/USB-TO-UART-Converter repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 62.5 mm with 16 parts on 41 nets, routed with 60 tracks and 0 vias.
Its parts include 7 resistors, 4 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Ye aur chhota hai (lagbhag 280 characters): > **Designed a USB to UART Converter PCB using KiCad 9. The project includes schematic design, PCB layout, and ERC/DRC verification. It provides reliable USB-to-UART communication for programming, debugging, and serial data transfer with ESP32, STM32, Arduino, and other microcontrollers.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nf | Capacitor_THT:CP_Radial_D17.0mm_P7.50mm | C1, C2, C3, C4 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P7.62mm_Vertical | R6, R7 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0918_L18.0mm_D9.0mm_P25.40mm_Horizontal | R5 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 85 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rohit85885/USB-TO-UART-Converter repository on GitHub, at the commit this page was made from: the board is USB to uart convertor.kicad_pcb and its schematic USB to uart convertor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).