
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Motion Suit PCB is an open-source printed circuit board by Rodald, from the Rodald/Homemade-PCB repository on GitHub. It is a 2-layer board of 100 × 70 mm with 12 parts on 55 nets, routed with 44 tracks and 0 vias.
It belongs with the ESP32 boards of this library.
The goal for this Project is to manufacture PCBs at home using DIY UV photolithography. This Repository includes two different PCB designs.
The benchmark PCB includes 5 different tests:
The goal:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Esp32 Left | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2 |
| 1 | Esp32 right | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3 |
| 1 | JST-XH Power | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | JST-XH Sensor Left | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | JST-XH Sensor Right | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | Multiplexer Left | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J4 |
| 1 | Multiplexer Right | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J5 |
| 1 | Stepdown Bottom Left | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | Stepdown Bottom Right | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Stepdown Top Left | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Stepdown Top Right | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | USB-C Female Breakout | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rodald/Homemade-PCB repository on GitHub, at the commit this page was made from: the board is Motion_Suit_PCB.kicad_pcb and its schematic Benchmark_Test_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Rodald before reusing the design.