
Quadruped
RocketScientist26/Quadruped-Hardware
Main, Battery protection and Servo PCBs for Quadruped robot

Main, Battery protection and Servo PCBs for Quadruped robot
Battery is an open-source printed circuit board by RocketScientist26, from the RocketScientist26/Quadruped-Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 39 × 55.8 mm with 295 parts on 7 nets, routed with 134 tracks and 0 vias.
It is built around the FS8205A and FS312F-G. Its parts include 273 connectors, 13 ICs, 2 resistors, 1 capacitor and 1 switch. It belongs with the power and robots and motor control boards of this library.
Main, Battery protection and Servo PCBs for Quadruped robot
Project page: https://rocket-scientist.me/quadruped.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 273 | CONN_1 | RS-Quadruped:SIL1_VIA | P4, P4, P4, P4, P4, P4, P4, P4, P4, P4, P4, P4, P4, P4, P4, P4 +257 |
| 12 | FS8205A | RS-Quadruped:TSSOP8 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12 |
| 1 | 100 | RS-Quadruped:SM0805 | R1 |
| 1 | 100nf | RS-Quadruped:SM0805 | C1 |
| 1 | 1k | RS-Quadruped:SM0805 | R2 |
| 1 | BATTERY | RS-Quadruped:SIL2_SMD_P | BT1 |
| 1 | CONN_2 | RS-Quadruped:SIL2_SMD_P | K1 |
| 1 | FS312F-G | RS-Quadruped:SOT23-6 | U13 |
| 1 | REF | RS-Quadruped:LeadFree_F.SilkS_6mm | VAL |
| 1 | REF | RS-Quadruped:ESD_Mark_5mm | VAL |
| 1 | REF | RS-Quadruped:ROHS_F.SilkS_6mm | VAL |
| 1 | REF | RS-Quadruped:Logo_Front_5mm | VAL |

Projeto-Guarda-Rios/PCB
O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

SuperPower/Artemis
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal


ikatkov/lipo-protection-board
There are two version, one is single layer and rectangular, the other is double layers, long and narrow.


cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,

alxhoff/gameboy-dmg-pcb
PCB for Gameboy DMG with audio and GPIO expander to provide I2C interface to push buttons
It measures 39 × 55.8 mm and has 2 copper layers, 1.6 mm thick.
295 parts, built around the FS8205A and FS312F-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RocketScientist26/Quadruped-Hardware repository on GitHub, at the commit this page was made from: the board is Battery/Battery.kicad_pcb and its schematic Battery/Battery.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).