Skip to the content
2 layers22 × 11 mmRGB module, the printed circuit board in 3D
Size
22 × 11 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
7
Pads
31
Tracks, vias
41, 14
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 May 2025
Updated
27 May 2025

Overview

RGB module is an open-source printed circuit board by RoboticsBrno, from the RoboticsBrno/RB0014-RGB-module repository on GitHub. It is a 2-layer board of 22 × 11 mm with 10 parts on 7 nets, routed with 41 tracks and 14 vias.

It is built around the ZSCS-2016C-08D-Z4. Its parts include 4 resistors, 2 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards of this library.

Main components

1

Parts

10
QtyValueFootprintReferences
233Resistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x04Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ1, J2
2LEDRKL-LED:XL-3014UWC-02D1, D2
10Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
1100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
1100nCapacitor_SMD:C_0402_1005MetricC1
1ZSCS-2016C-08D-Z4RKL-SpecialModules:ZSCS-2016C-08D-Z4U1

More from RoboticsBrno/RB0014-RGB-module

1
  • 2 layers86 × 89 mmPanel, the printed circuit board in 3D

    Panel

    RoboticsBrno/RB0014-RGB-module

    609 parts

Similar boards

  • 4 layers102 × 100 mmZelvicka, the printed circuit board in 3D

    Zelvicka

    RoboticsBrno/Robutek

    Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.

    214 parts12
  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0

Questions

How big is the RGB module PCB?

It measures 22 × 11 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RGB module use?

10 parts, built around the ZSCS-2016C-08D-Z4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RGB module KiCad files?

From the RoboticsBrno/RB0014-RGB-module repository on GitHub, at the commit this page was made from: the board is hw/RGB_module.kicad_pcb and its schematic hw/RGB_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RGB module design in my own project?

Its repository states no licence, so its author keeps all rights: ask RoboticsBrno before reusing the design.