
Motor Toshiba Shield
Rob-Orb/Cards
In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.

In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.
Esc brushless motor is an open-source printed circuit board by Rob-Orb, from the Rob-Orb/Cards repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 29.7 × 64.6 mm with 54 parts on 100 nets.
It is built around the IR2301PBF, BSC0925ND and BAT54-02V(TP). Its parts include 28 resistors, 11 capacitors, 8 ICs, 3 diodes and 3 connectors. It belongs with the robots and motor control boards and the PIC boards of this library.
In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.
| Nickname | Library Path | Plugin Type |
|---|---|---|
| Rob | ../../Rob-5.lib | Legacy |
In PCBNew :
| Nickname | Library Path | Plugin Type |
|---|---|---|
| Rob | https://github.com/Rob-Orb/Rob-5.0.pretty | Github |
Or if you want to modify the library after cloning it :
| Nickname | Library Path | Plugin Type |
|---|---|---|
| Rob | ${KIPRJMOD}/../../../Rob-5.0.pretty | KiCad |
And clone the library Rob.pretty at the corresponding path (next to this repo).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R7, R9, R10, R11, R12, R16, R24, R25, R26, R27 |
| 6 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R13, R14, R15 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R18, R19, R20, R21, R22, R23 |
| 6 | 1u_10V | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6 |
| 3 | 47p | Capacitor_SMD:C_0402_1005Metric | C9, C10, C11 |
| 3 | BAT54-02V | Diode_SMD:D_0603_1608Metric | D1, D2, D3 |
| 3 | BSC0925ND | Rob-5.0:BSC0925ND | U5, U6, U7 |
| 3 | IR2301 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4 |
| 3 | Shunt | Resistor_SMD:R_0402_1005Metric | R4, R6, R8 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J1 |
| 1 | PIC16F1777-TQFP | Package_QFP:TQFP-44_10x10mm_P0.8mm | U8 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | RPI0-Template | Rob-5.0:RPi0_Template | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J3 |

Rob-Orb/Cards
In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.

Rob-Orb/Cards
In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.

Rob-Orb/Cards
In Eeschema : You should find the library in the folder kicad-symbols. Link this library to kicad.

ManuelArgibay/BLDC-ESC-PCB
PCB de 4 capas en KiCad para un ESC sensorless de motor BLDC (IR2301 + LM339, detección de BEMF) con Tiva C TM4C123GXL

ricknoboa137/BioZ-muscle-monitor
A portable, battery-powered bioimpedance spectroscopy (BIS) device that measures biceps muscle impedance during and after exercise, to track fatigue and fluid shift.



MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver



It measures 29.7 × 64.6 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the IR2301PBF, BSC0925ND and BAT54-02V(TP). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rob-Orb/Cards repository on GitHub, at the commit this page was made from: the board is Rpi0/esc_brushless_motor/esc_brushless_motor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).