
Konami-2 DE10Nano adapter
RndMnkIII/Konami_arcade
Hello everyone, I created this repository to share it with other people interested in preserving Konami's arcade boards in the form of core for FPGA.

Hello everyone, I created this repository to share it with other people interested in preserving Konami's arcade boards in the form of core for FPGA.
Konami-2 DE10Nano adapter V1 2 is an open-source printed circuit board by RndMnkIII, from the RndMnkIII/Konami_arcade repository on GitHub. It is a 2-layer board of 92.2 × 83.8 mm with 50 parts on 99 nets, routed with 1,214 tracks and 64 vias.
It is built around the SN74LVC8T245PWRE4. Its parts include 17 capacitors, 15 resistors, 6 ICs and 5 connectors. It belongs with the interfaces and adapters boards and the FPGA and CPLD boards of this library.
Hello everyone, I created this repository to share it with other people interested in preserving Konami's arcade boards in the form of core for FPGA. All the material I collect as well as my own developments will be uploaded to the repository. I would like the authorship of the material to be recognized if someone considers it useful for their own developments.

I've created this PDF with a description of the IC's as I found on the Aliens arcade board: https://github.com/RndMnkIII/Konami_arcade/blob/master/Aliens/Documentation/konami_custom_ICs_Aliens.pdf
I have also included photographs of the IC's to facilitate the identification of the pins for pickling these chips. I should be grateful for the help provided to @furrtek in this regard, as it is collaborating to reverse engineer the operation of these circuits.
I have developed a pcb to be able to debug the signals of the konami-2 cpu (052526) using the FPGA DE10-Nano, it is simply an appropriate interface to route the signals from the cpu pins to the GPIO1 connector of the FPGA by a bidirectional conversion of TTL 5v and CMOS 3.3v levels.
All the schematics of the Kicad version 5.1 board are available in the repository for download, as well as the step files with the 3d models that are not in the standard Kicad library that I have used for the footprints of the components.
https://github.com/RndMnkIII/Konami_arcade/blob/master/Aliens/verilog/PAL16L8_053327-D20.v https://github.com/RndMnkIII/Konami_arcade/blob/master/Aliens/verilog/PAL16L8_053326-D21.v


https://github.com/RndMnkIII/Konami_arcade/blob/master/Aliens/hardware/roms/aliens3.mra
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Condensadores:C_Polyester_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C4, C6, C7, C9, C10, C12, C13, C15, C16 |
| 12 | 4.7K | Resistencias:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R13 |
| 5 | 1uF | Condensadores:C_Polyester_D3.8mm_W2.6mm_P2.50mm | C5, C8, C11, C14, C17 |
| 5 | SN74LVC8T245PWR | SN74LVC8T245PWR:TSSOP-24_SN74LVC8T245PWR | U3, U4, U5, U6, U7 |
| 2 | 10K | Resistencias:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R14, R15 |
| 2 | LOGO | Logos:Konami_logo_scaled | G***, G*** |
| 1 | 1K | Resistencias:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R12 |
| 1 | 5V PWR SRC | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | 5V_EXTERNAL | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | CLKE | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 1 | CLKQ | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP4 |
| 1 | CONTROL2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | EXT. 2 PHASE CLK | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
| 1 | Expansion Port 5V ONLY | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J3 |
| 1 | FPGA Port | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J2 |
| 1 | Isolate Data from FPGA | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP5 |
| 1 | Isolate from FPGA | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | Konami-2 | Konami-2_PGA:KONAMI-2_64_PGA | U1 |

RndMnkIII/Konami_arcade
Hello everyone, I created this repository to share it with other people interested in preserving Konami's arcade boards in the form of core for FPGA.

RndMnkIII/Konami_arcade
Hello everyone, I created this repository to share it with other people interested in preserving Konami's arcade boards in the form of core for FPGA.


sam-falvo/VDC-II
An open source Video Display Controller following in the footsteps, but not a clone, of the Commodore 8568 VDC chip.

samuelclay/grove
Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016



Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors

ekundo/combolite
ComboLite: плата расширения для «Вектора-06Ц» — квазидиски, IDE, дисковод, AY, VGA, Wi-Fi
It measures 92.2 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the SN74LVC8T245PWRE4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RndMnkIII/Konami_arcade repository on GitHub, at the commit this page was made from: the board is Aliens/custom_pcbs/Konami-2_DE10Nano_adapter_V1_2/Konami-2_DE10Nano_adapter_V1_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RndMnkIII before reusing the design.